ACOUSTIC CONTRIBUTION |
Request the computation of
the acoustic contribution factors for the linear, eigenmode-based, steady-state
dynamic procedure. |
Unsupported |
Abaqus/Standard |
ACOUSTIC FLOW VELOCITY |
Specify flow velocities as
a predefined field for acoustic elements. |
Unsupported |
Abaqus/Standard |
ACOUSTIC MEDIUM |
Specify an acoustic medium. |
Property module |
Abaqus/Standard Abaqus/Explicit |
ACOUSTIC WAVE FORMULATION |
Specify the type of formulation in acoustic problems with incident wave loading. |
Model attribute |
Abaqus/Standard Abaqus/Explicit |
ACTIVATE ELEMENTS |
Activate elements within a
step. |
Unsupported |
Abaqus/Standard |
ADAPTIVE MESH |
Define an adaptive mesh
domain. |
Supported in the
Step module; only one adaptive mesh
domain can be defined per step. |
Abaqus/Standard Abaqus/Explicit |
ADAPTIVE MESH CONSTRAINT |
Specify constraints on the motion of the mesh for an adaptive mesh domain. |
Displacement and velocity adaptive mesh constraints are supported in the Step module. |
Abaqus/Standard Abaqus/Explicit |
ADAPTIVE MESH CONTROLS |
Specify controls for the adaptive meshing and advection algorithms. |
Step module |
Abaqus/Standard Abaqus/Explicit |
ADAPTIVE MESH REFINEMENT |
Activate adaptive mesh refinement in an Eulerian domain. |
Unsupported |
Abaqus/Explicit |
ADJUST |
Adjust user-specified nodal coordinates to lie on a given surface. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
AMPLITUDE |
Define an amplitude
curve. |
Amplitude toolset; bubble loading is
not supported. Similar functionality is available in the
Interaction
module. |
Abaqus/Standard Abaqus/Explicit |
ANISOTROPIC HYPERELASTIC |
Specify anisotropic
hyperelastic properties for approximately incompressible
materials. |
Property module |
Abaqus/Standard Abaqus/Explicit |
ANNEAL |
Anneal the structure. |
Step module |
Abaqus/Explicit |
ANNEAL TEMPERATURE |
Specify material properties for modeling annealing or melting. |
Property module |
Abaqus/Standard Abaqus/Explicit |
AQUA |
Define fluid variables for
use in loading immersed beam-type structures. |
Unsupported |
Abaqus/Aqua |
ASSEMBLY |
Begin an assembly
definition. |
Assembly module |
Abaqus/Standard Abaqus/Explicit |
ASYMMETRIC-AXISYMMETRIC |
Define areas of integration for contact elements used with CAXAn or SAXAn elements. |
Unsupported |
Abaqus/Standard |
AXIAL |
Used to define the axial behavior of beams. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
BASE MOTION |
Define the base motion for linear, eigenmode-based, dynamic procedures. |
Unsupported |
Abaqus/Standard |
BASELINE CORRECTION |
Include baseline correction. |
Amplitude toolset |
Abaqus/Standard |
BEAM ADDED INERTIA |
Define additional beam inertia. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
BEAM FLUID INERTIA |
Define additional beam inertia due to immersion in a fluid. |
Property module |
Abaqus/Standard Abaqus/Explicit |
BEAM GENERAL SECTION |
Specify a beam section
when numerical integration over the section is not required. |
General beam sections with linear
response are supported in the
Property module. |
Abaqus/Standard Abaqus/Explicit |
BEAM SECTION |
Specify a beam section
when numerical integration over the section is required. |
Property module |
Abaqus/Standard Abaqus/Explicit |
BEAM SECTION GENERATE |
Generate beam section properties for a meshed cross-section. |
Unsupported |
Abaqus/Standard |
BEAM SECTION OFFSET |
Define an offset for the
beam cross-section origin. |
Unsupported |
Abaqus/Standard |
BIAXIAL TEST DATA |
Used to provide biaxial test data (compression and/or tension). |
Property module |
Abaqus/Standard Abaqus/Explicit |
BLOCKAGE |
Control contacting surfaces for blockage. |
Unsupported |
Abaqus/Explicit |
BOND |
Define bonds and bonding properties. |
Unsupported |
Abaqus/Explicit |
BOUNDARY |
Specify boundary
conditions. |
Load module; fluid cavity pressure
and generalized plane strain boundary conditions are not
supported. |
Abaqus/Standard Abaqus/Explicit |
BRITTLE CRACKING |
Define brittle cracking properties. |
Property module |
Abaqus/Explicit |
BRITTLE FAILURE |
Specify brittle failure criterion. |
Property module |
Abaqus/Explicit |
BRITTLE SHEAR |
Define the postcracking shear behavior of a material used with the brittle cracking model. |
Property module |
Abaqus/Explicit |
BUCKLE |
Obtain eigenvalue buckling estimates. |
Step module |
Abaqus/Standard |
BUCKLING ENVELOPE |
Define a nondefault buckling envelope for buckling strut response of frame elements with PIPE sections. |
Unsupported |
Abaqus/Standard |
BUCKLING LENGTH |
Define buckling length data for buckling strut response of frame elements with PIPE sections. |
Unsupported |
Abaqus/Standard |
BUCKLING REDUCTION FACTORS |
Define buckling reduction factors for buckling strut response of frame elements with PIPE sections. |
Unsupported |
Abaqus/Standard |
BULK VISCOSITY |
Modify bulk viscosity parameters. |
Step module |
Abaqus/Explicit |
C ADDED MASS |
Specify concentrated added mass in a FREQUENCY step. |
Unsupported |
Abaqus/Aqua |
CAP CREEP |
Specify a cap creep law and material properties. |
Property module |
Abaqus/Standard |
CAP HARDENING |
Specify Drucker-Prager/Cap plasticity hardening. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CAP PLASTICITY |
Specify the Modified Drucker-Prager/Cap plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CAPACITY |
Define the molar heat capacity at constant pressure for an ideal gas species. |
Interaction module |
Abaqus/Explicit |
CAST IRON COMPRESSION HARDENING |
Specify hardening in compression for the gray cast iron plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CAST IRON PLASTICITY |
Specify plastic material properties for gray cast iron. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CAST IRON TENSION HARDENING |
Specify hardening in tension for the gray cast iron plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CAVITY DEFINITION |
Define a cavity for thermal radiation. |
Interaction module |
Abaqus/Standard |
CECHARGE |
Specify concentrated electric charges in piezoelectric analysis. |
Load module |
Abaqus/Standard |
CECURRENT |
Specify concentrated current in an electric conduction analysis. |
Load module |
Abaqus/Standard |
CENTROID |
Define the position of the centroid of the beam section. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CFILM |
Define film coefficients and associated sink temperatures at one or more nodes or vertices. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CFLOW |
Specify concentrated fluid flow. |
Load module |
Abaqus/Standard |
CFLUX |
Specify concentrated
fluxes in heat transfer or mass diffusion analyses. |
Load module |
Abaqus/Standard Abaqus/Explicit |
CHANGE FRICTION |
Change friction properties. |
Interaction module |
Abaqus/Standard |
CHARACTERISTIC LENGTH |
Define characteristic element length at a material point. |
Unsupported |
Abaqus/Explicit |
CLAY HARDENING |
Specify hardening for the clay plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CLAY PLASTICITY |
Specify the extended Cam-clay plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CLEARANCE |
Specify a particular
initial clearance value and a contact direction for the slave nodes on a
surface. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CLOAD |
Specify concentrated
forces and moments. |
Load module |
Abaqus/Standard Abaqus/Explicit Abaqus/Aqua |
COHESIVE BEHAVIOR |
Specify contact cohesive
behavior properties. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
COHESIVE SECTION |
Specify element properties for cohesive elements. |
Property module |
Abaqus/Standard Abaqus/Explicit |
COMBINED TEST DATA |
Specify simultaneously the normalized shear and bulk compliances or relaxation moduli as functions of time. |
Property module |
Abaqus/Standard Abaqus/Explicit |
COMPLEX FREQUENCY |
Extract complex eigenvalues and modal vectors. |
Step module |
Abaqus/Standard |
COMPOSITE MODAL DAMPING |
Specify composite modal damping for modal analyses based on the SIM architecture. |
Unsupported |
Abaqus/Standard |
CONCRETE |
Define concrete properties
beyond the elastic range. |
Property module |
Abaqus/Standard |
CONCRETE COMPRESSION DAMAGE |
Define compression damage properties for the concrete damaged plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CONCRETE COMPRESSION HARDENING |
Define hardening in compression for the concrete damaged plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CONCRETE DAMAGED PLASTICITY |
Define flow potential, yield surface, and viscosity parameters for the concrete damaged plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CONCRETE TENSION DAMAGE |
Define postcracking damage properties for the concrete damaged plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CONCRETE TENSION STIFFENING |
Define postcracking properties for the concrete damaged plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CONDUCTIVITY |
Specify thermal
conductivity. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR BEHAVIOR |
Begin the specification of a connector behavior. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR CONSTITUTIVE REFERENCE |
Define reference lengths and angles to be used in specifying connector constitutive behavior. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR DAMAGE EVOLUTION |
Specify connector damage
evolution for connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR DAMAGE INITIATION |
Specify connector damage
initiation criteria for connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR DAMPING |
Define connector damping behavior. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR DERIVED COMPONENT |
Specify user-defined components in connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR ELASTICITY |
Define connector elastic behavior. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR FAILURE |
Define a failure criterion
for connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR FRICTION |
Define friction forces and
moments in connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR HARDENING |
Define the plasticity initial yield value and hardening behavior in connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR LOAD |
Specify loads for available components of relative motion in connector elements. |
Load module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR LOCK |
Define a locking criterion
for connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR MOTION |
Specify the motion of
available components of relative motion in connector elements. |
Load module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR PLASTICITY |
Define plasticity behavior in connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR POTENTIAL |
Specify user-defined
potentials in connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR SECTION |
Specify connector
attributes for connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR STOP |
Specify connector stops for connector elements. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONNECTOR UNIAXIAL BEHAVIOR |
Define uniaxial behavior in connector elements. |
Interaction module |
Abaqus/Explicit |
CONSTITUENT |
Define a constituent in
the multiscale material. |
Unsupported |
Abaqus/Standard |
CONSTRAINT CONTROLS |
Reset overconstraint checking controls. |
Unsupported |
Abaqus/Standard |
CONTACT |
Begin the definition of general contact. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT CLEARANCE |
Define contact clearance properties. |
Unsupported |
Abaqus/Explicit |
CONTACT CLEARANCE ASSIGNMENT |
Assign contact clearances between surfaces in the general contact domain. |
Unsupported |
Abaqus/Explicit |
CONTACT CONTROLS |
Specify additional controls for contact. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT CONTROLS ASSIGNMENT |
Assign contact controls for the general contact algorithm. |
Unsupported |
Abaqus/Explicit |
CONTACT DAMPING |
Define viscous damping between contacting surfaces. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT EXCLUSIONS |
Specify self-contact surfaces or surface pairings to exclude from the general contact domain. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT FILE |
Define results file requests for contact variables. |
Unsupported; Abaqus/CAE reads output from the output database file only. |
Abaqus/Standard |
CONTACT FORMULATION |
Specify a nondefault
contact formulation for the general contact algorithm. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT INCLUSIONS |
Specify self-contact surfaces or surface pairings to include in the general contact domain. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT INITIALIZATION ASSIGNMENT |
Assign contact initialization methods for general contact. |
Interaction module |
Abaqus/Standard |
CONTACT INITIALIZATION DATA |
Define contact initialization methods for general contact. |
Interaction module |
Abaqus/Standard |
CONTACT INTERFERENCE |
Prescribe time-dependent allowable interferences of contact pairs and contact elements. |
Interaction module |
Abaqus/Standard |
CONTACT OUTPUT |
Specify contact variables
to be written to the output database. |
Step module |
Abaqus/Standard Abaqus/Explicit |
CONTACT PAIR |
Define surfaces that contact each other. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT PERMEABILITY |
Specify fluid permeability
contact property. |
Unsupported |
Abaqus/Standard |
CONTACT PRINT |
Define print requests for contact variables. |
Unsupported |
Abaqus/Standard |
CONTACT PROPERTY ASSIGNMENT |
Assign contact properties for the general contact algorithm. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CONTACT RESPONSE |
Define contact responses for design sensitivity analysis. |
Unsupported |
Abaqus/Design |
CONTACT STABILIZATION |
Define contact
stabilization controls for general contact. |
Interaction module |
Abaqus/Standard |
CONTOUR INTEGRAL |
Provide contour integral
estimates. |
Interaction module |
Abaqus/Standard |
CONTROLS |
Reset solution
controls. |
Step module |
Abaqus/Standard |
CONWEP CHARGE PROPERTY |
Define a CONWEP charge for incident waves. |
Unsupported |
Abaqus/Explicit |
CORRELATION |
Define cross-correlation
properties for random response loading. |
Unsupported |
Abaqus/Standard |
CO-SIMULATION |
Identify that the current
step is a co-simulation step in
Abaqus. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CO-SIMULATION CONTROLS |
Specify the coupling and
rendezvousing scheme for co-simulation. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CO-SIMULATION REGION |
Identify the interface
regions in the
Abaqus
model and specify the fields to be exchanged during co-simulation. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
COUPLED TEMPERATURE-DISPLACEMENT |
Fully coupled, simultaneous heat transfer and stress analysis. |
Step module |
Abaqus/Standard |
COUPLED THERMAL-ELECTRICAL |
Fully coupled, simultaneous heat transfer and electrical analysis. |
Step module |
Abaqus/Standard |
COUPLING |
Define a surface-based
coupling constraint. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CRADIATE |
Specify radiation conditions and associated sink temperatures at one or more nodes or vertices. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
CREEP |
Define a creep law. |
Property module |
Abaqus/Standard |
CREEP STRAIN RATE CONTROL |
Control loadings based on the maximum equivalent creep strain rate. |
Unsupported |
Abaqus/Standard |
CRUSH STRESS |
Define the crush stress of
a material. |
Unsupported |
Abaqus/Explicit |
CRUSH STRESS VELOCITY FACTOR |
Define how the approach
velocity at a crushing interface influences a material's resistance to
crushing. |
Unsupported |
Abaqus/Explicit |
CRUSHABLE FOAM |
Specify the crushable foam plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CRUSHABLE FOAM HARDENING |
Specify hardening for the crushable foam plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CYCLED PLASTIC |
Specify cycled yield
stress data for the ORNL model. |
Property module |
Abaqus/Standard |
CYCLIC |
Define cyclic symmetry for a cavity radiation heat transfer analysis. |
Interaction module |
Abaqus/Standard |
CYCLIC HARDENING |
Specify the size of the
elastic range for the combined hardening model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
CYCLIC SYMMETRY MODEL |
Define the number of sectors and the axis of symmetry for a cyclic symmetric structure. |
Interaction module |
Abaqus/Standard |
D ADDED MASS |
Specify distributed added mass in a FREQUENCY step. |
Unsupported |
Abaqus/Aqua |
D EM POTENTIAL |
Specify distributed surface magnetic vector potential. |
Load module |
Abaqus/Standard |
DAMAGE EVOLUTION |
Specify material
properties to define the evolution of damage. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DAMAGE INITIATION |
Specify material and
contact properties to define the initiation of damage. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DAMAGE STABILIZATION |
Specify viscosity coefficients for the damage model for fiber-reinforced materials, surface-based cohesive behavior or cohesive behavior in enriched elements. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DAMPING |
Specify material
damping. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DAMPING CONTROLS |
Specify damping
controls. |
Supported in the
Step module only for substructure
generation. |
Abaqus/Standard |
DASHPOT |
Define dashpot
behavior. |
Property module and
Interaction module; supported only
for linear behavior independent of field variables. For nonlinear behavior or
to include field variables, model connectors in the
Interaction
module. |
Abaqus/Standard Abaqus/Explicit |
DEBOND |
Activate crack propagation capability and specify debonding amplitude curve. |
Unsupported |
Abaqus/Standard |
DECHARGE |
Input distributed electric charges for piezoelectric analysis. |
Load module |
Abaqus/Standard |
DECURRENT |
Specify distributed current densities in an electromagnetic analysis. |
Load module |
Abaqus/Standard |
DEFORMATION PLASTICITY |
Specify the deformation plasticity model. |
Property module |
Abaqus/Standard |
DENSITY |
Specify material mass
density. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DEPVAR |
Specify solution-dependent state variables. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DESIGN GRADIENT |
Directly specify design gradients for design sensitivity analysis. |
Unsupported |
Abaqus/Design |
DESIGN PARAMETER |
Specify design parameters with respect to which sensitivities are calculated. |
Unsupported |
Abaqus/Design |
DESIGN RESPONSE |
Specify responses for design sensitivity analysis. |
Unsupported |
Abaqus/Design |
DETONATION POINT |
Define detonation points for a JWL explosive equation of state. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DFLOW |
Specify distributed
seepage flows for consolidation analysis. |
Load module |
Abaqus/Standard |
DFLUX |
Specify distributed
fluxes in computational fluid dynamics and mass diffusion analyses and specify
distributed fluxes and nonuniform concentrated fluxes in heat transfer
analyses. |
Load module |
Abaqus/Standard Abaqus/Explicit |
DIAGNOSTICS |
Control diagnostic messages. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
DIELECTRIC |
Specify dielectric material properties. |
Property module |
Abaqus/Standard |
DIFFUSIVITY |
Specify mass diffusivity. |
Property module |
Abaqus/Standard |
DIRECT CYCLIC |
Obtain the stabilized cyclic response of a structure directly. |
Step module |
Abaqus/Standard |
DISCRETE ELASTICITY |
Specify effective elastic material properties for discrete particles. |
Unsupported |
Abaqus/Explicit |
DISCRETE SECTION |
Specify element properties for discrete elements. |
Unsupported |
Abaqus/Explicit |
DISPLAY BODY |
Define a part instance that will be used for display only. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
DISTRIBUTING |
Define a distributing
coupling constraint. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
DISTRIBUTING COUPLING |
Specify nodes and weighting for distributing coupling elements. |
Unsupported; this option has been superseded by coupling constraints used in conjunction with the distributing option. |
Abaqus/Standard |
DISTRIBUTION |
Define spatial
distributions. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DISTRIBUTION TABLE |
Define a distribution
table. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DLOAD |
Specify distributed
loads. |
Load module |
Abaqus/Standard Abaqus/Explicit Abaqus/Aqua |
DOMAIN DECOMPOSITION |
Define a region for domain
decomposition and/or define constraints on the domain
decomposition. |
Unsupported |
Abaqus/Explicit |
DRAG CHAIN |
Specify parameters for drag chain elements. |
Unsupported |
Abaqus/Standard |
DRUCKER PRAGER |
Specify the extended Drucker-Prager plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DRUCKER PRAGER CREEP |
Specify a Drucker-Prager creep law and material properties. |
Property module |
Abaqus/Standard |
DRUCKER PRAGER HARDENING |
Specify hardening for
Drucker-Prager plasticity models. |
Property module |
Abaqus/Standard Abaqus/Explicit |
DSA CONTROLS |
Set DSA solution controls. |
Unsupported |
Abaqus/Design |
DSECHARGE |
Input distributed electric surface charges for piezoelectric analysis. |
Load module |
Abaqus/Standard |
DSECURRENT |
Specify distributed current densities over a surface in an electromagnetic analysis. |
Load module |
Abaqus/Standard |
DSFLOW |
Specify distributed seepage flows normal to a surface. |
Load module |
Abaqus/Standard |
DSFLUX |
Specify distributed
surface fluxes for heat transfer analysis. |
Load module |
Abaqus/Standard Abaqus/Explicit |
DSLOAD |
Specify distributed
surface loads. |
Load module |
Abaqus/Standard Abaqus/Explicit |
DYNAMIC |
Dynamic stress/displacement analysis. |
Step module |
Abaqus/Standard Abaqus/Explicit |
DYNAMIC TEMPERATURE-DISPLACEMENT |
Dynamic coupled thermal-stress analysis using explicit integration. |
Step module |
Abaqus/Explicit |
EL FILE |
Define results file
requests for element variables. |
Unsupported;
Abaqus/CAE
reads output from the output database file
only. |
Abaqus/Standard Abaqus/Explicit |
EL PRINT |
Define data file requests for element variables. |
Unsupported |
Abaqus/Standard |
ELASTIC |
Specify elastic material properties. |
Property module |
Abaqus/Standard Abaqus/Explicit |
ELCOPY |
Create elements by copying
from an existing element set. |
Not applicable; copying portions of
sketches and instancing of parts serve similar
purposes. |
Abaqus/Standard Abaqus/Explicit |
ELECTRICAL CONDUCTIVITY |
Specify electrical conductivity. |
Property module |
Abaqus/Standard |
ELECTROMAGNETIC |
Electromagnetic response. |
Step module |
Abaqus/Standard |
ELEMENT |
Define elements by giving
their nodes. |
Mesh module |
Abaqus/Standard Abaqus/Explicit |
ELEMENT MATRIX OUTPUT |
Write element stiffness
matrices and mass matrices to a file. |
Unsupported |
Abaqus/Standard |
ELEMENT OPERATOR OUTPUT |
Write element operator output to a SIM document. |
Unsupported |
Abaqus/Standard |
ELEMENT OUTPUT |
Define output database
requests for element variables. |
Step module |
Abaqus/Standard Abaqus/Explicit |
ELEMENT PROGRESSIVE ACTIVATION |
Define the element
progressive activation feature and its properties. |
Unsupported |
Abaqus/Standard |
ELEMENT RESPONSE |
Define element responses for design sensitivity analysis. |
Unsupported |
Abaqus/Design |
ELGEN |
Incremental element
generation. |
Not applicable; elements are generated when you
mesh
the model. |
Abaqus/Standard Abaqus/Explicit |
ELSET |
Assign elements to an
element set. |
Set toolset |
Abaqus/Standard Abaqus/Explicit |
EMBEDDED ELEMENT |
Specify an element or a group of elements that lie embedded in a group of “host” elements in a model. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
EMISSIVITY |
Specify surface emissivity. |
Interaction module |
Abaqus/Standard |
END ASSEMBLY |
End the definition of an
assembly. |
Assembly module |
Abaqus/Standard Abaqus/Explicit |
END INSTANCE |
End the definition of an
instance. |
Assembly module for part instances
not imported from a previous analysis;
Load module for part instances
imported from a previous
analysis |
Abaqus/Standard Abaqus/Explicit |
END LOAD CASE |
End the definition of a load case for multiple load case analysis. |
Load module |
Abaqus/Standard |
END PART |
End the definition of a
part. |
Part module |
Abaqus/Standard Abaqus/Explicit |
END STEP |
End the definition of a
step. |
Step module |
Abaqus/Standard Abaqus/Explicit |
ENERGY FILE |
Write energy output to the results file. |
Unsupported; Abaqus/CAE reads output from the output database file only. |
Abaqus/Standard Abaqus/Explicit |
ENERGY OUTPUT |
Define output database
requests for whole model or element set energy data. |
Step module |
Abaqus/Standard Abaqus/Explicit |
ENERGY PRINT |
Print a summary of the total energies. |
Unsupported |
Abaqus/Standard |
ENRICHMENT |
Specify an enriched
feature and the properties of the enrichment. |
Interaction module |
Abaqus/Standard |
ENRICHMENT ACTIVATION |
Activate or deactivate an enriched feature. |
Interaction module |
Abaqus/Standard |
EOS |
Specify an equation of
state model. |
Property module |
Abaqus/Explicit |
EOS COMPACTION |
Specify plastic compaction behavior for an equation of state model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
EPJOINT |
Define properties for elastic-plastic joint elements. |
Unsupported |
Abaqus/Standard |
EQUATION |
Define linear multi-point
constraints. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
EULERIAN BOUNDARY |
Define inflow and outflow conditions at Eulerian mesh boundaries. |
Load module |
Abaqus/Explicit |
EULERIAN MESH MOTION |
Define the motion of an Eulerian mesh. |
Load module |
Abaqus/Explicit |
EULERIAN SECTION |
Specify element properties for Eulerian elements. |
Property module |
Abaqus/Explicit |
EVENT SERIES |
Define the event series
data. |
Unsupported |
Abaqus/Standard |
EVENT SERIES TYPE |
Define the type of an
event series. |
Unsupported |
Abaqus/Standard |
EXPANSION |
Specify thermal or field
expansion. |
Property module |
Abaqus/Standard Abaqus/Explicit |
EXTREME ELEMENT VALUE |
Define element variables to be monitored. |
Unsupported |
Abaqus/Explicit |
EXTREME NODE VALUE |
Define nodal variables to be monitored. |
Unsupported |
Abaqus/Explicit |
EXTREME VALUE |
Define element and nodal variables to be monitored. |
Unsupported |
Abaqus/Explicit |
FABRIC |
Specify the in-plane response of a fabric material. |
Unsupported |
Abaqus/Explicit |
FAIL STRAIN |
Define parameters for strain-based failure measures. |
Property module |
Abaqus/Standard Abaqus/Explicit |
FAIL STRESS |
Define parameters for stress-based failure measures. |
Property module |
Abaqus/Standard Abaqus/Explicit |
FAILURE RATIOS |
Define the shape of the failure surface for a CONCRETE model. |
Property module |
Abaqus/Standard |
FASTENER |
Define mesh-independent fasteners. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FASTENER PROPERTY |
Prescribe mesh-independent
fastener properties. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FIELD |
Specify predefined field
variable values. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
FILE FORMAT |
Specify format for results file output and invoke zero-increment results file output. |
Unsupported; Abaqus/CAE does not use the results file. |
Abaqus/Standard |
FILE OUTPUT |
Define output written to the results file. |
Unsupported; Abaqus/CAE reads output from the output database file only. |
Abaqus/Explicit |
FILM |
Define film coefficients and associated sink temperatures. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FILM PROPERTY |
Define a film coefficient as a function of temperature and field variables. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FILTER |
Define a filter and/or
operator for output filtering and/or operating. |
Filter toolset |
Abaqus/Explicit |
FIXED MASS SCALING |
Specify mass scaling at the beginning of the step. |
Step module |
Abaqus/Explicit |
FLEXIBLE BODY |
Generate a flexible body
from a substructure. |
Unsupported |
Abaqus/Standard |
FLOW |
Define seepage coefficients and associated sink pore pressures. |
Unsupported |
Abaqus/Standard |
FLUID BEHAVIOR |
Define fluid behavior for a fluid cavity. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID BULK MODULUS |
Define compressibility for a hydraulic fluid. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID CAVITY |
Define a fluid cavity. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID DENSITY |
Specify hydrostatic fluid density. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID EXCHANGE |
Define fluid exchange. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID EXCHANGE ACTIVATION |
Activate fluid exchange definitions. |
Unsupported |
Abaqus/Explicit |
FLUID EXCHANGE PROPERTY |
Define the fluid exchange property for flow in or out of a fluid cavity. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID EXPANSION |
Specify the thermal expansion coefficient for a hydraulic fluid. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
FLUID FLUX |
Change the amount of fluid in a fluid-filled cavity. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
FLUID INFLATOR |
Define a fluid inflator. |
Unsupported |
Abaqus/Explicit |
FLUID INFLATOR ACTIVATION |
Activate fluid inflator definitions. |
Unsupported |
Abaqus/Explicit |
FLUID INFLATOR MIXTURE |
Define gas species used for a fluid inflator. |
Unsupported |
Abaqus/Explicit |
FLUID INFLATOR PROPERTY |
Define a fluid inflator property. |
Unsupported |
Abaqus/Explicit |
FLUID LEAKOFF |
Define fluid leak-off coefficients for pore pressure cohesive elements. |
Property module |
Abaqus/Standard |
FLUID PIPE CONNECTOR LOSS |
Specify fluid pipe connector element loss. |
Unsupported |
Abaqus/Standard |
FLUID PIPE CONNECTOR SECTION |
Specify fluid pipe connector element section properties. |
Unsupported |
Abaqus/Standard |
FLUID PIPE FLOW LOSS |
Specify fluid pipe element loss. |
Unsupported |
Abaqus/Standard |
FLUID PIPE SECTION |
Specify fluid pipe element section properties. |
Unsupported |
Abaqus/Standard |
FOUNDATION |
Prescribe element foundations. |
Interaction module |
Abaqus/Standard |
FRACTURE CRITERION |
Specify crack propagation criteria. |
Property module and Interaction module |
Abaqus/Standard Abaqus/Explicit |
FRAME SECTION |
Specify a frame
section. |
Unsupported |
Abaqus/Standard |
FREQUENCY |
Extract natural
frequencies and modal vectors. |
Step module |
Abaqus/Standard Abaqus/AMS |
FRICTION |
Specify a friction
model. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
GAP |
Specify clearance and local geometry for GAP-type elements. |
Unsupported; similar functionality is available by modeling connectors. |
Abaqus/Standard |
GAP CONDUCTANCE |
Introduce heat conductance between interface surfaces. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
GAP ELECTRICAL CONDUCTANCE |
Specify electrical conductance between surfaces. |
Unsupported |
Abaqus/Standard |
GAP FLOW |
Define constitutive parameters for tangential flow in pore pressure cohesive elements. |
Property module |
Abaqus/Standard |
GAP HEAT GENERATION |
Introduce heat generation due to energy dissipation at the interface. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
GAP RADIATION |
Introduce heat radiation between surfaces. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
GAS SPECIFIC HEAT |
Define reacted product's specific heat for an ignition and growth equation of state. |
Property module |
Abaqus/Explicit |
GASKET BEHAVIOR |
Begin the specification of a gasket behavior. |
Property module |
Abaqus/Standard |
GASKET CONTACT AREA |
Specify a gasket contact area or contact width for average pressure output. |
Property module |
Abaqus/Standard |
GASKET ELASTICITY |
Specify elastic properties for the membrane and transverse shear behaviors of a gasket. |
Property module |
Abaqus/Standard |
GASKET SECTION |
Specify element properties for gasket elements. |
Property module |
Abaqus/Standard |
GASKET THICKNESS BEHAVIOR |
Specify a gasket thickness-direction behavior. |
Property module |
Abaqus/Standard |
GEL |
Define a swelling gel. |
Property module |
Abaqus/Standard |
GEOSTATIC |
Obtain a geostatic stress field. |
Step module |
Abaqus/Standard |
GLOBAL DAMPING |
Specify global damping. |
Supported in the Step module only for substructure generation. |
Abaqus/Standard |
HEADING |
Print a heading on the
output. |
Job module |
Abaqus/Standard Abaqus/Explicit |
HEAT GENERATION |
Include volumetric heat generation in heat transfer analyses. |
Property module |
Abaqus/Standard |
HEAT TRANSFER |
Transient or steady-state
uncoupled heat transfer analysis. |
Step module |
Abaqus/Standard |
HEATCAP |
Specify a point capacitance. |
Property module and Interaction module. |
Abaqus/Standard Abaqus/Explicit |
HOURGLASS STIFFNESS |
Specify nondefault hourglass stiffness. |
Mesh module |
Abaqus/Standard |
HYPERELASTIC |
Specify elastic properties for approximately incompressible elastomers. |
Property module |
Abaqus/Standard Abaqus/Explicit |
HYPERFOAM |
Specify elastic properties for a hyperelastic foam. |
Property module |
Abaqus/Standard Abaqus/Explicit |
HYPOELASTIC |
Specify hypoelastic material properties. |
Property module |
Abaqus/Standard |
HYSTERESIS |
Specify a rate-dependent elastomer model. |
Property module |
Abaqus/Standard |
IMPEDANCE |
Define impedances for acoustic analysis. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
IMPEDANCE PROPERTY |
Define the impedance
parameters for an acoustic medium boundary. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
IMPERFECTION |
Introduce geometric
imperfections for postbuckling analysis. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
IMPORT |
Import information from a previous Abaqus/Explicit or Abaqus/Standard analysis. |
Supported for use in conjunction with part instances; importing selected part instances stored in an output database is supported using the File menu and importing the initial state of part instances is supported in the Load module. |
Abaqus/Standard Abaqus/Explicit |
IMPORT CONTROLS |
Specify tolerances used in importing model and results data. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
IMPORT ELSET |
Import element set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
IMPORT NSET |
Import node set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
INCIDENT WAVE |
Define incident wave loading for a blast or scattering load on a boundary. |
Unsupported; this option has been superseded by incident wave interactions. |
Abaqus/Standard Abaqus/Explicit |
INCIDENT WAVE FLUID PROPERTY |
Define the fluid properties associated with an incident wave. |
Unsupported; this option has been superseded by incident wave interaction properties. |
Abaqus/Standard Abaqus/Explicit |
INCIDENT WAVE INTERACTION |
Define incident wave
loading for a blast or scattering load on a surface. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
INCIDENT WAVE INTERACTION PROPERTY |
Define the geometric data and fluid properties describing an incident wave. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
INCIDENT WAVE PROPERTY |
Define the geometric data describing an incident wave. |
Unsupported; this option has been superseded by incident wave interaction properties. |
Abaqus/Standard Abaqus/Explicit |
INCIDENT WAVE REFLECTION |
Define the reflection load on a surface caused by incident wave fields. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
INCLUDE |
Reference an external file
containing
Abaqus
input data. |
Several input data options in
Abaqus/CAE
provide the capability to reference external files; for example, the material
editor can read material properties from an ASCII
file. |
Abaqus/Standard Abaqus/Explicit |
INCREMENTATION OUTPUT |
Define output database requests for time incrementation data. |
Step module |
Abaqus/Standard Abaqus/Explicit |
INELASTIC HEAT FRACTION |
Define the fraction of the rate of inelastic dissipation that appears as a heat source. |
Property module |
Abaqus/Standard Abaqus/Explicit |
INERTIA RELIEF |
Apply inertia-based load balancing. |
Load module |
Abaqus/Standard |
INITIAL CONDITIONS |
Specify initial conditions
for the model. |
Load module |
Abaqus/Standard Abaqus/Explicit Abaqus/Aqua |
INSTANCE |
Begin an instance
definition. |
Assembly module for part instances
not imported from a previous analysis;
Load module for part instances
imported from a previous analysis |
Abaqus/Standard Abaqus/Explicit |
INTEGRATED OUTPUT |
Specify variables
integrated over a surface to be written to the output database. |
Step module |
Abaqus/Standard Abaqus/Explicit |
INTEGRATED OUTPUT SECTION |
Define an integrated output section over a surface with a local coordinate system and a reference point. |
Step module |
Abaqus/Standard Abaqus/Explicit |
INTERFACE |
Define properties for contact elements. |
Property module; supported for two-dimensional, three-dimensional, and axisymmetric acoustic interface elements. Contact elements are not supported. |
Abaqus/Standard |
ITS |
Define properties for ITS elements. |
Unsupported; similar functionality (with the
exception of friction) is available by modeling
connectors. |
Abaqus/Standard |
JOINT |
Define properties for JOINTC elements. |
Unsupported; similar functionality is available by modeling connectors. |
Abaqus/Standard |
JOINT ELASTICITY |
Specify elastic properties for elastic-plastic joint elements. |
Unsupported |
Abaqus/Standard |
JOINT PLASTICITY |
Specify plastic properties for elastic-plastic joint elements. |
Unsupported |
Abaqus/Standard |
JOINTED MATERIAL |
Specify the jointed material model. |
Unsupported |
Abaqus/Standard |
JOULE HEAT FRACTION |
Define the fraction of electric energy released as heat. |
Property module |
Abaqus/Standard |
KAPPA |
Specify the material parameters for mass diffusion driven by gradients of temperature and equivalent pressure stress. |
Property module |
Abaqus/Standard |
KINEMATIC |
Define a kinematic
coupling constraint. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
KINEMATIC COUPLING |
Constrain all or specific
degrees of freedom of a set of nodes to the rigid body motion of a reference
node. |
Unsupported; this option has been
superseded by coupling constraints used in conjunction with the kinematic
option. |
Abaqus/Standard |
LATENT HEAT |
Specify latent heats. |
Property module |
Abaqus/Standard Abaqus/Explicit |
LOAD CASE |
Begin a load case definition for multiple load case analysis. |
Load module |
Abaqus/Standard |
LOADING DATA |
Provide loading data for uniaxial behavior models in connectors or provide data from a uniaxial or a shear loading test for fabric materials. |
Unsupported |
Abaqus/Explicit |
LOW DENSITY FOAM |
Specify properties for a low-density foam. |
Property module |
Abaqus/Explicit |
M1 |
Define the first bending moment behavior of beams. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
M2 |
Define the second bending moment behavior of beams. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
MAGNETIC PERMEABILITY |
Specify magnetic permeability. |
Property module |
Abaqus/Standard |
MAGNETOSTATIC |
Magnetostatic analysis. |
Unsupported |
Abaqus/Standard |
MAP SOLUTION |
Map a solution from an old mesh to a new mesh. |
Unsupported |
Abaqus/Standard |
MASS |
Specify a point mass. |
Property module and Interaction module. |
Abaqus/Standard Abaqus/Explicit |
MASS ADJUST |
Adjust and/or redistribute the mass of an element set. |
Unsupported |
Abaqus/Explicit |
MASS DIFFUSION |
Transient or steady-state uncoupled mass diffusion analysis. |
Step module |
Abaqus/Standard |
MASS FLOW RATE |
Specify fluid mass flow
rate in a heat transfer analysis. |
Unsupported |
Abaqus/Standard |
MATERIAL |
Begin the definition of a
material. |
Property module |
Abaqus/Standard Abaqus/Explicit |
MATRIX |
Read in the stiffness or
mass matrix for a linear user element. |
Unsupported |
Abaqus/Standard |
MATRIX ASSEMBLE |
Define stiffness, mass, or
damping matrices for a part of the model. |
Unsupported |
Abaqus/Standard |
MATRIX CHECK |
Check the quality of the generated stiffness and mass matrices. |
Unsupported |
Abaqus/Standard |
MATRIX GENERATE |
Generate global or element
matrices. |
Unsupported |
Abaqus/Standard |
MATRIX INPUT |
Read in a matrix for a
part of the model. |
Unsupported |
Abaqus/Standard |
MATRIX OUTPUT |
Output generated matrices
in various forms. |
Unsupported |
Abaqus/Standard |
MEAN FIELD HOMOGENIZATION |
Begin the definition of a
multiscale material modeled with mean-field homogenization. |
Unsupported |
Abaqus/Standard |
MEDIA TRANSPORT |
Activate or deactivate a periodic media. |
Unsupported |
Abaqus/Explicit |
MEMBRANE SECTION |
Specify section properties for membrane elements. |
Property module |
Abaqus/Standard Abaqus/Explicit |
MODAL DAMPING |
Specify damping for modal
dynamic analysis. |
Step module |
Abaqus/Standard |
MODAL DYNAMIC |
Dynamic time history analysis using modal superposition. |
Step module |
Abaqus/Standard |
MODAL FILE |
Write generalized coordinate (modal amplitude) data or eigendata to the results file during a mode-based dynamic or eigenvalue extraction procedure. |
Unsupported; Abaqus/CAE reads output from the output database file only. |
Abaqus/Standard |
MODAL OUTPUT |
Write generalized coordinate (modal amplitude) data to the output database during a mode-based dynamic or complex eigenvalue extraction procedure. |
Step module |
Abaqus/Standard |
MODAL PRINT |
Print generalized coordinate (modal amplitude) data during a mode-based dynamic procedure. |
Unsupported |
Abaqus/Standard |
MODEL CHANGE |
Remove or reactivate elements and contact pairs. |
Interaction module |
Abaqus/Standard |
MOHR COULOMB |
Specify the Mohr-Coulomb plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
MOHR COULOMB HARDENING |
Specify hardening for the Mohr-Coulomb plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
MOISTURE SWELLING |
Define moisture-driven swelling. |
Property module |
Abaqus/Standard |
MOLECULAR WEIGHT |
Define the molecular weight of an ideal gas species. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
MONITOR |
Define a degree of freedom to monitor. |
Step module |
Abaqus/Standard Abaqus/Explicit |
MOTION |
Specify motions as a
predefined field. |
Unsupported |
Abaqus/Standard |
MPC |
Define multi-point
constraints. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
MULLINS EFFECT |
Specify Mullins effect material parameters for elastomers. |
Property module |
Abaqus/Standard Abaqus/Explicit |
NCOPY |
Create nodes by
copying. |
Not applicable; copying portions of sketches
and instancing of parts serve similar
purposes. |
Abaqus/Standard Abaqus/Explicit |
NETWORK STIFFNESS RATIO |
Specify stiffness ratios for viscoelastic networks. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
NFILL |
Fill in nodes in a
region. |
Not applicable; nodes are generated when you
mesh the model. |
Abaqus/Standard Abaqus/Explicit |
NGEN |
Generate incremental
nodes. |
Not applicable; nodes are generated when you
mesh
the model. |
Abaqus/Standard Abaqus/Explicit |
NMAP |
Map nodes from one
coordinate system to another and rotate, translate, or scale the nodal
coordinates. |
Unsupported; meshing techniques in the
Mesh module
are usually preferable. |
Abaqus/Standard Abaqus/Explicit |
NO COMPRESSION |
Introduce a compressive failure theory (tension only materials). |
Property module |
Abaqus/Standard |
NO TENSION |
Introduce a tension failure theory (compression only material). |
Property module |
Abaqus/Standard |
NODAL ENERGY RATE |
Define critical energy
release rates at nodes. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
NODAL THICKNESS |
Define shell or membrane
thickness at nodes. |
Property module |
Abaqus/Standard Abaqus/Explicit |
NODE |
Specify nodal
coordinates. |
Mesh module |
Abaqus/Standard Abaqus/Explicit |
NODE FILE |
Define results file
requests for nodal data. |
Unsupported;
Abaqus/CAE
reads output from the output database file
only. |
Abaqus/Standard Abaqus/Explicit |
NODE OUTPUT |
Define output database
requests for nodal data. |
Step module |
Abaqus/Standard Abaqus/Explicit |
NODE PRINT |
Define print requests for nodal variables. |
Unsupported |
Abaqus/Standard |
NODE RESPONSE |
Define nodal responses for design sensitivity analysis. |
Unsupported |
Abaqus/Design |
NONLINEAR BH |
Specify nonlinear magnetic behavior of a soft magnetic material. |
Property module |
Abaqus/Standard |
NONSTRUCTURAL MASS |
Specify mass contribution to the model from nonstructural features. |
Property module and Interaction module. |
Abaqus/Standard Abaqus/Explicit |
NORMAL |
Specify a particular normal direction. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
NSET |
Assign nodes to a node
set. |
Set toolset |
Abaqus/Standard Abaqus/Explicit |
ORIENTATION |
Define a local axis system for material or element property definition, for kinematic coupling constraints, for free directions for inertia relief loads, or for connectors. |
Property module, Interaction module, and Load module |
Abaqus/Standard Abaqus/Explicit |
ORNL |
Specify constitutive model developed by Oak Ridge National Laboratory. |
Property module |
Abaqus/Standard |
OUTPUT |
Define output requests to
the output database. |
Step module |
Abaqus/Standard Abaqus/Explicit |
PARAMETER |
Define parameters for input parametrization. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
PARAMETER DEPENDENCE |
Define dependence table for tabularly dependent parameters. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
PARAMETER SHAPE VARIATION |
Define parametric shape
variations. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
PARAMETER TABLE |
Define the parameters in
the parameter table. |
Unsupported |
Abaqus/Standard |
PARAMETER TABLE TYPE |
Define the type of
parameter table. |
Unsupported |
Abaqus/Standard |
PART |
Begin a part
definition. |
Part module |
Abaqus/Standard Abaqus/Explicit |
PARTICLE GENERATOR |
Specify a particle generator. |
Unsupported |
Abaqus/Explicit |
PARTICLE GENERATOR FLOW |
Specify flow speed and
mass flow rate per unit inlet area for a particle species. |
Unsupported |
Abaqus/Explicit |
PARTICLE GENERATOR INLET |
Specify a particle generator inlet surface. |
Unsupported |
Abaqus/Explicit |
PARTICLE GENERATOR MIXTURE |
Specify particle generator species mixture. |
Unsupported |
Abaqus/Explicit |
PERFECTLY MATCHED LAYER |
Specify perfectly matched layer properties. |
Unsupported |
Abaqus/Standard |
PERIODIC |
Define periodic symmetry for a cavity radiation heat transfer analysis. |
Interaction module |
Abaqus/Standard |
PERIODIC MEDIA |
Specify a periodic media. |
Unsupported |
Abaqus/Explicit |
PERMANENT MAGNETIZATION |
Specify permanent magnetization. |
Unsupported |
Abaqus/Standard |
PERMEABILITY |
Define permeability for
pore fluid flow. |
Property module |
Abaqus/Standard |
PHYSICAL CONSTANTS |
Specify physical constants. |
Model attribute |
Abaqus/Standard Abaqus/Explicit |
PIEZOELECTRIC |
Specify piezoelectric material properties. |
Property module |
Abaqus/Standard |
PIPE-SOIL INTERACTION |
Specify element properties for pipe-soil interaction elements. |
Unsupported |
Abaqus/Standard |
PIPE-SOIL STIFFNESS |
Define constitutive behavior for pipe-soil interaction elements. |
Unsupported |
Abaqus/Standard |
PLANAR TEST DATA |
Used to provide planar test (or pure shear) data (compression and/or tension). |
Property module |
Abaqus/Standard Abaqus/Explicit |
PLASTIC |
Specify a metal plasticity
model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
PLASTIC AXIAL |
Define plastic axial force for frame elements. |
Unsupported |
Abaqus/Standard |
PLASTIC M1 |
Define the first plastic bending moment behavior for frame elements. |
Unsupported |
Abaqus/Standard |
PLASTIC M2 |
Define the second plastic bending moment behavior for frame elements. |
Unsupported |
Abaqus/Standard |
PLASTIC TORQUE |
Define the plastic torsional moment behavior for frame elements. |
Unsupported |
Abaqus/Standard |
PML COEFFICIENT |
Specify perfectly matched layer coefficients. |
Unsupported |
Abaqus/Standard |
POROUS BULK MODULI |
Define bulk moduli for soils and rocks. |
Property module |
Abaqus/Standard |
POROUS ELASTIC |
Specify elastic material
properties for porous materials. |
Property module |
Abaqus/Standard |
POROUS FAILURE CRITERIA |
Define porous material failure criteria for a POROUS METAL PLASTICITY model. |
Property module |
Abaqus/Explicit |
POROUS METAL PLASTICITY |
Specify a porous metal plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
POST OUTPUT |
Postprocess for output from the restart file. |
Unsupported |
Abaqus/Standard |
POTENTIAL |
Define an anisotropic yield/creep model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
PREPRINT |
Select printout for the analysis input file processor. |
Job module |
Abaqus/Standard Abaqus/Explicit |
PRESSURE PENETRATION |
Specify pressure penetration loads with surface-based contact. |
Interaction module |
Abaqus/Standard |
PRESSURE STRESS |
Specify equivalent
pressure stress as a predefined field for a mass diffusion
analysis. |
Unsupported |
Abaqus/Standard |
PRESTRESS HOLD |
Keep rebar prestress constant during initial equilibrium solution. |
Unsupported |
Abaqus/Standard |
PRE-TENSION SECTION |
Associate a pre-tension node with a pre-tension section. |
Load module |
Abaqus/Standard |
PRINT |
Request or suppress output
to the message file in an
Abaqus/Standard
analysis or to the status file in an
Abaqus/Explicit
analysis. |
Step module |
Abaqus/Standard Abaqus/Explicit |
PROBABILITY DENSITY FUNCTION |
Specify a probability density function. |
Unsupported |
Abaqus/Explicit |
PROPERTY TABLE |
Define the property
table. |
Unsupported |
Abaqus/Standard |
PROPERTY TABLE TYPE |
Define the type of
property table. |
Unsupported |
Abaqus/Standard |
PSD-DEFINITION |
Define a cross-spectral
density frequency function for random response loading. |
Unsupported |
Abaqus/Standard |
RADIATE |
Specify radiation conditions in heat transfer analyses. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
RADIATION FILE |
Define results file requests for cavity radiation heat transfer. |
Unsupported; Abaqus/CAE reads output from the output database file only. |
Abaqus/Standard |
RADIATION OUTPUT |
Define output database requests for cavity radiation variables. |
Step module |
Abaqus/Standard |
RADIATION PRINT |
Define print requests for cavity radiation heat transfer. |
Unsupported |
Abaqus/Standard |
RADIATION SYMMETRY |
Define cavity symmetries for radiation heat transfer analysis. |
Interaction module |
Abaqus/Standard |
RADIATION VIEW FACTOR |
Control cavity radiation and view factor calculations. |
Interaction module |
Abaqus/Standard |
RANDOM RESPONSE |
Calculate response to random loading. |
Step module |
Abaqus/Standard |
RATE DEPENDENT |
Define a rate-dependent viscoplastic model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
RATIOS |
Define anisotropic swelling. |
Property module |
Abaqus/Standard |
REACTION RATE |
Define the reaction rate for an ignition and growth equation of state. |
Property module |
Abaqus/Explicit |
REBAR |
Define rebar as an element property. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
REBAR LAYER |
Define layers of reinforcement in membrane, shell, surface, and continuum elements. |
Property module; supported only for membrane and shell elements. |
Abaqus/Standard Abaqus/Explicit |
REFLECTION |
Define reflection symmetries for a cavity radiation heat transfer analysis. |
Interaction module |
Abaqus/Standard |
RELEASE |
Release rotational degrees
of freedom at one or both ends of a beam element. |
Unsupported |
Abaqus/Standard |
RESPONSE SPECTRUM |
Calculate the response
based on user-supplied response spectra. |
Step module |
Abaqus/Standard |
RESTART |
Save and reuse data and
analysis results. |
Step module
for saving restart data;
Job module
for performing a restart
analysis |
Abaqus/Standard Abaqus/Explicit |
RETAINED NODAL DOFS |
Specify the degrees of freedom that are to be retained as external to a substructure. |
Load module |
Abaqus/Standard |
RIGID BODY |
Define a set of elements as a rigid body and define rigid element properties. |
Part module and Interaction module |
Abaqus/Standard Abaqus/Explicit |
RIGID SURFACE |
Define an analytical rigid surface. |
Part module |
Abaqus/Standard |
ROTARY INERTIA |
Define rigid body rotary inertia. |
Property module and Interaction module. |
Abaqus/Standard Abaqus/Explicit |
SECTION CONTROLS |
Specify section
controls. |
Mesh module |
Abaqus/Standard Abaqus/Explicit |
SECTION FILE |
Define results file requests of accumulated quantities on user-defined surface sections. |
Unsupported |
Abaqus/Standard |
SECTION ORIGIN |
Define a meshed cross-section origin. |
Unsupported |
Abaqus/Standard |
SECTION POINTS |
Locate points in the beam section for which stress and strain output are required. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SECTION PRINT |
Define print requests of accumulated quantities on user-defined surface sections. |
Unsupported |
Abaqus/Standard |
SELECT CYCLIC SYMMETRY MODES |
Specify the cyclic symmetry modes in an eigenvalue analysis of a cyclic symmetric structure. |
Interaction module |
Abaqus/Standard |
SELECT EIGENMODES |
Select the modes to be used in a modal dynamic, complex eigenvalue extraction, or substructure generation analysis. |
Supported in the Step module only for substructure generation. |
Abaqus/Standard |
SFILM |
Define film coefficients
and associated sink temperatures over a surface for heat transfer
analysis. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
SFLOW |
Define seepage coefficients and associated sink pore pressures normal to a surface. |
Unsupported |
Abaqus/Standard |
SHEAR CENTER |
Define the position of the shear center of a beam section. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SHEAR FAILURE |
Specify a shear failure model and criterion. |
Unsupported |
Abaqus/Explicit |
SHEAR RETENTION |
Define the reduction of the shear modulus associated with crack surfaces in a CONCRETE model as a function of the tensile strain across the crack. |
Property module |
Abaqus/Standard |
SHEAR TEST DATA |
Used to provide shear test data. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SHELL GENERAL SECTION |
Define a general,
arbitrary, elastic shell section. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SHELL SECTION |
Specify a shell cross-section. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SHELL TO SOLID COUPLING |
Define a surface-based coupling between a shell edge and a solid face. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
SIMPEDANCE |
Define impedances of acoustic surfaces. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
SIMPLE SHEAR TEST DATA |
Used to provide simple shear test data. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SLIDE LINE |
Specify slide line surfaces on which deformable structures may interact. |
Unsupported; the Interaction module uses surface-based contact. |
Abaqus/Standard |
SLOAD |
Apply loads to a
substructure. |
Unsupported |
Abaqus/Standard |
SOFT ROCK HARDENING |
Specify hardening for the
soft rock plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SOFT ROCK PLASTICITY |
Specify the soft rock
plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SOFTENING REGULARIZATION |
Specify softening
regularization for the clay plasticity model and the soft rock plasticity
model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SOILS |
Effective stress analysis for fluid-filled porous media. |
Step module |
Abaqus/Standard |
SOLID SECTION |
Specify element properties
for solid, infinite, acoustic, particle, and truss elements. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SOLUBILITY |
Specify solubility. |
Property module |
Abaqus/Standard |
SOLUTION TECHNIQUE |
Specify alternative
solution methods. |
Step module |
Abaqus/Standard |
SOLVER CONTROLS |
Specify controls for the iterative and direct linear solvers. |
Step module |
Abaqus/Standard |
SORPTION |
Define absorption and exsorption behavior. |
Property module |
Abaqus/Standard |
SPECIFIC HEAT |
Define specific
heat. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SPECTRUM |
Define or create a
response spectrum. |
Amplitude toolset; supported only for
defining a spectrum. |
Abaqus/Standard |
SPH SURFACE BEHAVIOR |
Define boundary surface interaction properties between SPH particles and Lagrangian surfaces. |
Unsupported |
Abaqus/Explicit |
SPRING |
Define spring
behavior. |
Property module and
Interaction module; supported only
for linear behavior independent of field variables. For nonlinear behavior or
to include field variables, model connectors in the
Interaction
module. |
Abaqus/Standard Abaqus/Explicit |
SRADIATE |
Specify surface radiation
conditions in heat transfer analysis. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
STATIC |
Static stress/displacement
analysis. |
Step module |
Abaqus/Standard |
STEADY STATE CRITERIA |
Specify steady-state criteria for terminating a quasi-static uni-directional simulation. |
Unsupported |
Abaqus/Explicit |
STEADY STATE DETECTION |
Specify steady-state
requirements for terminating a quasi-static uni-directional
simulation. |
Unsupported |
Abaqus/Explicit |
STEADY STATE DYNAMICS |
Steady-state dynamic response based on harmonic excitation. |
Step module |
Abaqus/Standard |
STEADY STATE TRANSPORT |
Steady-state transport analysis. |
Unsupported |
Abaqus/Standard |
STEP |
Begin a step. |
Step module |
Abaqus/Standard Abaqus/Explicit |
SUBCYCLING |
Define a subcycling zone. |
Unsupported |
Abaqus/Explicit |
SUBMODEL |
Specify driven boundary nodes in submodeling analysis. |
Load module and model attribute |
Abaqus/Standard Abaqus/Explicit |
SUBSTRUCTURE COPY |
Copy a substructure definition. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE DAMPING |
Specify mass proportional and stiffness proportional damping for a substructure. |
Unsupported |
Abaqus/Standard Abaqus/AMS |
SUBSTRUCTURE DAMPING CONTROLS |
Specify damping controls
for a substructure property. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE DELETE |
Remove a substructure from the substructure library. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE DIRECTORY |
List information about the substructures on a substructure library. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE GENERATE |
Substructure generation
analysis. |
Step module |
Abaqus/Standard |
SUBSTRUCTURE LOAD CASE |
Begin the definition of a
substructure load case. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE MATRIX OUTPUT |
Write a substructure's
recovery matrix, reduced stiffness matrix, mass matrix, load case vectors, and
gravity load vectors to a file. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE MODAL DAMPING |
Specify damping for a
substructure property. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE PATH |
Enter into a substructure to obtain output or return back from a previously entered substructure. |
Unsupported |
Abaqus/Standard |
SUBSTRUCTURE PROPERTY |
Translate, rotate, and/or reflect substructures. |
Unsupported |
Abaqus/Standard |
SUPERELASTIC |
Define the data for the
superelastic model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SUPERELASTIC HARDENING |
Specify hardening data for
martensite. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SUPERELASTIC HARDENING MODIFICATIONS |
Specify the stress-strain
response of superelastic materials as a function of plastic
strain. |
Property module |
Abaqus/Standard Abaqus/Explicit |
SURFACE |
Define a surface or region
in a model. |
Element-based surfaces are supported by
the
Surface toolset.
Node-based surfaces are not supported; if node-based surfaces are imported into
Abaqus/CAE,
they are treated as sets. |
Abaqus/Standard Abaqus/Explicit |
SURFACE BEHAVIOR |
Define alternative
pressure-overclosure relationships for contact. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
SURFACE FLAW |
Define geometry of surface
flaws. |
Unsupported |
Abaqus/Standard |
SURFACE INTERACTION |
Define surface interaction properties. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
SURFACE PROPERTY |
Define surface properties for cavity radiation. |
Interaction module |
Abaqus/Standard |
SURFACE PROPERTY ASSIGNMENT |
Assign surface properties
to a surface for the general contact algorithm. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
SURFACE SECTION |
Specify section properties for surface elements. |
Property module |
Abaqus/Standard Abaqus/Explicit Abaqus/Aqua |
SURFACE SMOOTHING |
Define surface smoothing methods. |
Interaction module |
Abaqus/Standard |
SWELLING |
Specify time-dependent volumetric swelling. |
Property module |
Abaqus/Standard |
SYMMETRIC MODEL GENERATION |
Create a three-dimensional
model from an axisymmetric or partial three-dimensional model. |
Unsupported |
Abaqus/Standard |
SYMMETRIC RESULTS TRANSFER |
Import results from an axisymmetric or partial three-dimensional analysis. |
Unsupported |
Abaqus/Standard |
SYSTEM |
Specify a local coordinate
system in which to define nodes. |
Not applicable; instancing a part in the
Assembly module
creates a local coordinate system.
|
Abaqus/Standard Abaqus/Explicit |
TABLE COLLECTION |
Transfer data from an
input file to a user subroutine. |
Unsupported |
Abaqus/Standard |
TEMPERATURE |
Specify temperature as a
predefined field. |
Load module |
Abaqus/Standard Abaqus/Explicit |
TENSILE FAILURE |
Specify a tensile failure model and criterion. |
Unsupported |
Abaqus/Explicit |
TENSION CUTOFF |
Specify tension cutoff data for the Mohr-Coulomb plasticity model. |
Property module |
Abaqus/Standard Abaqus/Explicit |
TENSION STIFFENING |
Define the retained tensile stress normal to a crack in a CONCRETE model. |
Property module |
Abaqus/Standard |
THERMAL EXPANSION |
Define the thermal
expansion behavior of beams. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
TIE |
Define surface-based tie and cyclic symmetry constraints or coupled acoustic-structural interactions. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
TIME POINTS |
Specify time points at
which data are written to the output database file, or specify time points in
the loading history at which the response of a structure will be evaluated in a
direct cyclic analysis. |
Step module |
Abaqus/Standard Abaqus/Explicit |
TORQUE |
Define the torsional behavior of beams. |
Unsupported |
Abaqus/Standard Abaqus/Explicit |
TORQUE PRINT |
Print a summary of the total torque that can be transmitted across axisymmetric slide lines. |
Unsupported |
Abaqus/Standard |
TRACER PARTICLE |
Define tracer particles for tracking the location of and results at material points during a step. |
Unsupported |
Abaqus/Explicit |
TRANSFORM |
Specify a local coordinate
system at nodes. |
Define nodal coordinate systems for
prescribed conditions in the
Load
module. |
Abaqus/Standard Abaqus/Explicit |
TRANSPORT VELOCITY |
Specify angular transport velocity. |
Unsupported |
Abaqus/Standard |
TRANSVERSE SHEAR STIFFNESS |
Define transverse shear stiffness for beams and shells. |
Property module |
Abaqus/Standard Abaqus/Explicit |
TRIAXIAL TEST DATA |
Provide triaxial test data. |
Property module |
Abaqus/Standard Abaqus/Explicit |
TRS |
Used to define
temperature-time shift for time history viscoelastic analysis. |
Property module |
Abaqus/Standard Abaqus/Explicit |
UEL PROPERTY |
Define property values to
be used with a user element type. |
Actuator/sensor interaction properties
can be defined in the
Interaction
module. |
Abaqus/Standard Abaqus/Explicit |
UNDEX CHARGE PROPERTY |
Define an UNDEX charge for incident waves. |
Interaction module |
Abaqus/Standard Abaqus/Explicit |
UNIAXIAL |
Characterize fabric materials through loading and unloading test data. |
Unsupported |
Abaqus/Explicit |
UNIAXIAL TEST DATA |
Used to provide uniaxial test data (compression and/or tension). |
Property module |
Abaqus/Standard Abaqus/Explicit |
UNLOADING DATA |
Provide unloading data for uniaxial behavior models in connectors or unloading data from uniaxial and shear tests for fabrics. |
Unsupported |
Abaqus/Explicit |
USER DEFINED FIELD |
Redefine field variables at a material point. |
Property module |
Abaqus/Standard Abaqus/Explicit |
USER ELEMENT |
Introduce a user-defined
element type. |
Actuator/sensor interactions can be
defined in the
Interaction
module. |
Abaqus/Standard Abaqus/Explicit |
USER MATERIAL |
Define material constants for use in subroutine UMAT, UMATHT, or VUMAT. |
Property module |
Abaqus/Standard Abaqus/Explicit |
USER OUTPUT VARIABLES |
Specify number of user variables. |
Property module |
Abaqus/Standard |
VARIABLE MASS SCALING |
Specify mass scaling during the step. |
Step module |
Abaqus/Explicit |
VIEW FACTOR OUTPUT |
Write radiation view factors to the results file in cavity radiation heat transfer analysis. |
Unsupported |
Abaqus/Standard |
VISCO |
Transient, static,
stress/displacement analysis with time-dependent material response (creep, swelling, and
viscoelasticity). |
Step module |
Abaqus/Standard |
VISCOELASTIC |
Specify dissipative
behavior for use with elasticity. |
Property module |
Abaqus/Standard Abaqus/Explicit |
VISCOSITY |
Specify material shear
viscosity. |
Property module |
Abaqus/Explicit |
VISCOUS |
Specify viscous material properties for the two-layer viscoplastic model. |
Property module |
Abaqus/Standard |
VOID NUCLEATION |
Define the nucleation of voids in a porous material. |
Property module |
Abaqus/Standard Abaqus/Explicit |
VOLUMETRIC TEST DATA |
Provide volumetric test
data. |
Property module |
Abaqus/Standard Abaqus/Explicit |
WAVE |
Define gravity waves for
use in immersed structure calculations. |
Unsupported |
Abaqus/Aqua |
WIND |
Define wind velocity profile for wind loading. |
Unsupported |
Abaqus/Aqua |