*COMPOSITE MODAL DAMPING

Specify composite modal damping for modal analyses based on the SIM architecture.

This option can be used only with the SIM architecture and can be used only with the FREQUENCY option. It specifies the composite modal damping data that enable calculation of the weighted mass and stiffness composite damping per each of the extracted eigenmodes during an eigenvalue extraction analysis. The damping data are requested for the mass proportional fraction of critical damping and for the stiffness proportional fraction of critical damping for specified element sets. This option can also be used to assign critical damping fractions to both mass and stiffness matrix input.

Related Topics
In Other Guides
Material damping
About dynamic analysis procedures

ProductsAbaqus/Standard

TypeHistory data

LevelStep

Optional parameters

MASS MATRIX INPUT

Set this parameter equal to the value of fraction of critical damping for all mass matrices included in the model by using the MATRIX INPUT, MATRIX=MASS option. If this parameter is omitted, the default is zero.

STIFFNESS MATRIX INPUT

Set this parameter equal to the value of fraction of critical damping for all stiffness matrices included in the model by using the MATRIX INPUT, MATRIX=STIFFNESS option. If this parameter is omitted, the default is zero.

Data lines to define a fraction of critical damping

First line

  1. Element number or element set name.

  2. Fraction of critical damping, ξM, for mass matrices included in this element or element set.

  3. Fraction of critical damping, ξK, for stiffness matrices included in this element or element set.

Repeat this data line as often as necessary to define modal damping for different elements and/or element sets.