*SUBSTRUCTURE MATRIX OUTPUT

Optional parameters

FILE NAME

This parameter is intended for use with OUTPUT FILE=USER DEFINED.

Set this parameter equal to the name of the file (without an extension) to which the data will be written. The extension .mtx will be added to the file name provided by the user; see Input Syntax Rules for the syntax of such file names.

If the OUTPUT FILE parameter is omitted or set equal to RESULTS FILE, use of the FILE NAME parameter overrides the OUTPUT FILE setting; the data will be written to the named file, not to the results (.fil) file.

GRAVITY LOAD

Set GRAVITY LOAD=YES to write the substructure gravity load vectors (only available if the gravity load vectors are requested with the SUBSTRUCTURE GENERATE option). The default is GRAVITY LOAD=NO.

MASS

Set MASS=YES to write the substructure mass matrix (only available if the mass matrix is requested with the SUBSTRUCTURE GENERATE option). The default is MASS=NO.

OUTPUT FILE

Set OUTPUT FILE=RESULTS FILE (default) to write the data to the results (.fil) file in the format specified in Results file output format.

Set OUTPUT FILE=USER DEFINED to write the results to a user-specified file in the format of the USER ELEMENT, LINEAR option (User-defined elements). The name of the file is specified using the FILE NAME parameter.

RECOVERY MATRIX

Set RECOVERY MATRIX=YES to write the substructure recovery matrix (only available if the recovery matrix is requested with the SUBSTRUCTURE GENERATE option). The default is RECOVERY MATRIX=NO.

SLOAD

Set SLOAD=YES to write the substructure load case vectors. The default is SLOAD=NO.

STIFFNESS

Set STIFFNESS=YES to write the substructure stiffness matrix. The default is STIFFNESS=NO.