*CONNECTOR FAILURE

Define a failure criterion for connector elements.

This option is used to define a failure criterion for connector elements.

Related Topics
*CONNECTOR BEHAVIOR
In Other Guides
Connector behavior
Connection types

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEInteraction module

Required parameters

COMPONENT

Set this parameter equal to the connector's component number for which a failure criterion is defined in Abaqus/Standard; only an available component of relative motion can be chosen. In Abaqus/Explicit any connector component number can be specified. See Connection types for connector components of relative motion definitions.

Optional parameters

RELEASE

In Abaqus/Standard set this parameter equal to ALL (default) to release all available components of relative motion when the failure criterion is satisfied. In Abaqus/Explicit set this parameter equal to ALL (default) to release all components (available or constrained) when the failure criterion is satisfied.

In Abaqus/Standard set this parameter equal to an available component of relative motion number to release only that component when the failure criterion is satisfied. In Abaqus/Explicit set this parameter equal to a component number to release only that component when the failure criterion is satisfied.

Data line to define the failure criterion

First (and only) line

  1. Lower bound on the connector's component of relative position specified by the COMPONENT parameter. If not specified, no lower bound is used for the selected component.

  2. Upper bound on the connector's component of relative position specified by the COMPONENT parameter. If not specified, no upper bound is used for the selected component.

  3. Lower bound on the force or moment in the direction of the component of relative motion indicated by the COMPONENT parameter. If not specified, no lower bound is used for the selected force or moment.

  4. Upper bound on the force or moment in the direction of the component of relative motion indicated by the COMPONENT parameter. If not specified, no upper bound is used for the selected force or moment.