ProductsAbaqus/StandardAbaqus/CAE
TypeModel data
LevelModel
Abaqus/CAEInteraction module
Required parameters
- NAME
-
Set this parameter equal to a label that will be used to refer to the cavity.
Optional parameters
- AMBIENT TEMP
-
Set this parameter equal to the reference temperature of the external medium to which radiation takes place in the case of an open cavity. If this parameter is omitted, the cavity is assumed to be closed.
- PARALLEL DECOMPOSITION
-
Set PARALLEL DECOMPOSITION=ON to enable parallel decomposition of a cavity during a cavity radiation analysis.
Set PARALLEL DECOMPOSITION=OFF (default) to disable parallel decomposition of a cavity during a cavity radiation analysis.
- SET PROPERTY
-
Include this parameter to set, or to redefine, surface properties for the surfaces making up the cavity. If this parameter is omitted, the cavity is assumed to consist of surfaces for which surface properties have already been defined as part of the surface definitions.
Data lines to define a cavity for thermal radiation using surfaces with defined surface properties (default)
- First line
List of surfaces that compose this cavity.
Repeat this data line as often as necessary to define the cavity. Up to 16 entries are allowed per line.
Data lines to define a cavity when the SET PROPERTY parameter is included
- First line
Surface name.
Surface property name.
Repeat this data line as often as necessary to define the cavity. Up to 16 entries are allowed per line.