ProductsAbaqus/Standard
TypeModel or history data
LevelModelStep
Required parameters
- NAME
- Set this parameter equal to the name
of the event series that will be used to refer this event series
data.
- TYPE
- Set this parameter equal to the name
of the event series type.
Optional parameters
- INPUT
- Set this parameter equal to the name
of the alternate input file containing the data lines for this option. See
Input Syntax Rules
for the syntax of such file names. If this parameter is omitted, it is assumed
that the data follow the keyword line.
- TIME
-
Set TIME=STEP TIME (default) for step time. If the step in which the amplitude is
referenced is in the frequency domain, STEP TIME corresponds to frequency.
Set TIME=TOTAL TIME for total time accumulated over all non-perturbation analysis
steps.
See
Conventions
for a discussion of these time measures.
Data lines to define event series
data
- First
line:
-
Time or frequency of the first event.
-
X-coordinate of the location of the first event.
-
Y-coordinate of the location of the first event.
-
Z-coordinate of the location of the first event.
-
The first field value of the first event.
-
The second field value of the first event.
-
Etc., up to four field values per line.
- Subsequent lines (only needed if the number of fields is greater
than four)
-
The fifth field value of the first event.
-
Etc., up to eight field values per line.
Repeat this set of data lines
as often as necessary to define all of the events.