ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE
TypeHistory data
LevelStep
Abaqus/CAEStep module
Optional parameters in
Abaqus/Standard
analyses
- ADAPTIVE MESH
Set ADAPTIVE MESH=YES to request detailed output during adaptive mesh smoothing. The
default is ADAPTIVE MESH=NO.
- CONTACT
Set CONTACT=YES to request detailed output of points that are contacting or
separating in interface and gap problems. This output is useful in difficult
contact problems to track the development of the solution during iteration
within an increment. The output will be printed for every increment unless FREQUENCY=0. The default is CONTACT=NO.
- FREQUENCY
Set this parameter equal to the output frequency, in increments. The output
will always be printed at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.
- MODEL CHANGE
Set MODEL CHANGE=YES to request detailed output of which elements are being removed
or reactivated in the step. This output includes the new original coordinates
and normals of elements being reactivated strain free in a large-displacement
analysis. The default is MODEL CHANGE=NO.
- PLASTICITY
Set PLASTICITY=YES to request detailed output of element and integration point
numbers for which the plasticity algorithms have failed to converge in the
material routines. This output is useful to determine the location in the mesh
and the plasticity model for which
Abaqus/Standard
is encountering material model difficulties. This information may help in
identifying modeling problems as well as material parameter specification
problems. The default is PLASTICITY=NO.
- RESIDUAL
Set RESIDUAL=YES (default) if the output of equilibrium residuals is to be
given during the equilibrium iterations. Set RESIDUAL=NO to suppress the output.
- SOLVE
Set SOLVE=YES (default) to request information regarding the actual number
of equations and the memory requirement in each iteration. Set SOLVE=NO to suppress the output.
Optional parameters in
Abaqus/Explicit
analyses
- ALLKE
Set ALLKE=YES to request that a column containing the total kinetic energy
be printed in the status file. Set ALLKE=NO to suppress this printout. The default is ALLKE=YES.
- CRITICAL ELEMENT
Set CRITICAL ELEMENT=YES to request that a column listing the element that has the
smallest stable time increment be printed in the status file. Set CRITICAL ELEMENT=NO to suppress this printout. The default is CRITICAL ELEMENT=YES.
- DMASS
Set DMASS=YES to request that a column containing the percent change in
total mass of the model due to mass scaling be printed in the status file. Set DMASS=NO to suppress this printout. The default is DMASS=NO unless active mass scaling is present in the step.
FIXED MASS SCALING propagated from a previous step is not considered to be
active mass scaling.
- ETOTAL
Set ETOTAL=YES to request that a column containing the energy balance of the
model be printed in the status file. Set ETOTAL=NO to suppress this printout. The default is ETOTAL=YES.
Other energy variables can also be printed. Please refer toTotal energy output
for energy variables available in
Abaqus/Explicit.
- MASS
Set MASS=YES to request that a column containing the total mass of the
model be printed in the status file. Set MASS=NO to suppress this printout. The default is MASS=NO.
There are no data lines associated with this option.