*MODAL PRINT

Print generalized coordinate (modal amplitude) data during a mode-based dynamic procedure.

This option is used during mode-based dynamic procedures to control the printed output of generalized coordinate (modal amplitude and phase) values.

Related Topics
In Other Guides
Output to the Data and Results Files

ProductsAbaqus/Standard

TypeHistory data

LevelStep

Optional parameters

FREQUENCY

Set this parameter equal to the output frequency, in increments. The output will always be printed at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set FREQUENCY=0 to suppress the output.

Data lines to request modal output in the data file

First line
  1. Give the identifying keys for the variables to be printed. The keys are defined in the “Modal variables” section of Abaqus/Standard output variable identifiers.

Repeat this data line as often as necessary: each line defines a table.