*CONSTITUENT

Define a constituent in the multiscale material.

This option is used to define the properties of a constituent in the multiscale material.

Related Topics
*MATERIAL
In Other Guides
Mean-field homogenization

ProductsAbaqus/Standard

TypeModel data

LevelModel

Required parameters

TYPE

Set TYPE=INCLUSION to define inclusion properties.

Set TYPE=MATRIX to define matrix properties. There can only be one matrix-typed constituent in the aggregate.

Set TYPE=VOID to define void inclusion properties.

Optional parameters

DIRECTION

This parameter is not relevant for spherical inclusion.

Set DIRECTION=FIXED (default) to define a fixed inclusion direction.

Set DIRECTION=ORIENTATION TENSOR to define the orientation distribution using a second-order orientation tensor.

Set DIRECTION=RANDOM3D to define a random orientation distribution in 3D.

ISOTROPIZATION COEFFICIENT

This parameter is meaningful only when the constituent is modeled with an elastic-plastic material.

Set this parameter equal to the factor used for scaling the plastic strain of the constituent when calculating the isotropic part of the tangent. The value must be greater than or equal to one. If this parameter is omitted, the general method is used for the isotropization.

MATERIAL

Set this parameter equal to the name of the material to be used with this constituent.

This parameter is not relevant if the constituent is void (TYPE=VOID).

NAME

Set this parameter equal to the name of the constituent.

The constituent name must be unique. This parameter is not relevant if the constituent is void (TYPE=VOID).

SHAPE
This parameter is not relevant for the matrix constituent (TYPE=MATRIX).

Set SHAPE=CYLINDER to define cylinder-shaped inclusions. The aspect ratio is infinite.

Set SHAPE=OBLATE to define oblate-shaped inclusions. The aspect ratio must be less than one.

Set SHAPE=PROLATE to define prolate-shaped inclusions. The aspect ratio must be greater than one.

Set SHAPE=PENNY to define penny-shaped inclusions. The aspect ratio must be less than one.

Set SHAPE=SPHERE to define spherical inclusions. The aspect ratio is one.

Data lines to define constituent properties with aligned directions (DIRECTION=FIXED)

First line
  1. Volume fraction.
  2. Aspect ratio. Leave blank if SHAPE=CYLINDER or SHAPE=SPHERE.
  3. Components of the direction vector defined in the local coordinate system. (default values are 1.0, 0.0, 0.0)

Data lines to define constituent properties with specified orientation distribution (DIRECTION=ORIENTATION TENSOR)

First line
  1. Volume fraction.
  2. Aspect ratio. Leave blank if SHAPE=CYLINDER or SHAPE=SPHERE.
  3. Components of the second-order orientation tensor in the local coordinate system.

Data lines to define constituent properties with random orientation (DIRECTION=RANDOM3D)

First line
  1. Volume fraction.
  2. Aspect ratio. Leave blank if SHAPE=CYLINDER or SHAPE=SPHERE.