*NONLINEAR BH

Specify nonlinear magnetic behavior of a soft magnetic material.

This option is used to specify nonlinear magnetic behavior of a soft magnetic material.

Related Topics
In Other Guides
Magnetic permeability

ProductsAbaqus/Standard

TypeModel data

LevelModel

Abaqus/CAEProperty module

Required parameters

DIR

Set this parameter equal to the local direction (1, 2, or 3) for which the material behavior is defined in the data lines to follow; set DIR=0 to define material behavior that is inactive in the current model but is available for future use. The NONLINEAR BH option must be repeated with different values of the DIR parameter to define independent magnetic behavior in three orthogonal directions.

For isotropic nonlinear magnetic behavior, include the NONLINEAR BH option only once (DIR=1, 2, or 3).

For orthotropic nonlinear magnetic behavior, the NONLINEAR BH option must be included three times (DIR=1, DIR=2, and DIR=3).

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the nonlinear magnetic behavior, in addition to temperature. If this parameter is omitted, the nonlinear magnetic behavior does not depend on field variables. See Material data definition for more information.

Data lines to define nonlinear magnetic behavior

First line

  1. Magnitude of the magnetic flux density vector in the direction specified by the DIR parameter.

  2. Magnitude of the magnetic field vector in the direction specified by the DIR parameter.

  3. Temperature.

  4. First field variable.

  5. Second field variable.

  6. Etc., up to five field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)

  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the magnetic flux density on the magnetic field and, if needed, on temperature and other predefined field variables.