*DETONATION POINT

Define detonation points for a JWL explosive equation of state.

This option is used to define detonation points for a JWL explosive equation of state. It is required when the EOS, TYPE=JWL option is used. The DETONATION POINT option should appear immediately after the EOS option.

Related Topics
*EOS
In Other Guides
Equation of state

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

There are no parameters associated with this option.

 

Data lines to define detonation points

First line

  1. Coordinate 1 of detonation point.

  2. Coordinate 2 of detonation point.

  3. Coordinate 3 of detonation point.

  4. Detonation delay time (total time, as defined in Conventions). The default is 0.

Repeat this data line as often as necessary to define each detonation point.