ProductsAbaqus/StandardAbaqus/CAE
TypeModel data
LevelModel
Abaqus/CAEProperty module
Optional parameters
- DEPENDENCIES
-
Set this parameter equal to the number of field variables included in the definition of or . If this parameter is omitted, or is assumed not to depend on any field variables but may still depend on concentration and temperature. See Material data definition for more information.
- TYPE
-
Set TYPE=TEMP (default) to define (governing mass diffusion caused by temperature gradients). Set TYPE=PRESS to define (governing mass diffusion caused by gradients of the equivalent pressure stress).
Data lines to define the Soret effect factor (TYPE=TEMP)
- First line
Soret effect factor, . (Units of F1/2L−1.)
Concentration, c.
Temperature, .
First field variable.
Second field variable.
Etc., up to five field variables.
- Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define as a function of concentration, temperature, and other predefined field variables.
Data lines to define the pressure stress factor (TYPE=PRESS)
- First line
Pressure stress factor, . (Units of LF−1/2.)
Concentration, c.
Temperature, .
First field variable.
Second field variable.
Etc., up to five field variables.
- Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define as a function of concentration, temperature, and other predefined field variables.