*DISTRIBUTION

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. X-coordinate of point a.

3. Y-coordinate of point a.

4. Z-coordinate of point a.

5. X-coordinate of point b.

6. Y-coordinate of point b.

7. Z-coordinate of point b.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. Angle (in degrees).

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. Shell or membrane thickness.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. Shell offset.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent uses of this data line.

2. $D_{11}$.

3. $D_{12}$.

4. $D_{22}$.

5. $D_{13}$.

6. $D_{23}$.

7. $D_{33}$.

8. $D_{14}$.

1. $D_{24}$.

2. $D_{34}$.

3. $D_{44}$.

4. $D_{15}$.

5. $D_{25}$.

6. $D_{35}$.

7. $D_{45}$.

8. $D_{55}$.

1. $D_{16}$.

2. $D_{26}$.

3. $D_{36}$.

4. $D_{46}$.

5. $D_{56}$.

6. $D_{66}$.

Repeat this set of data lines as often as necessary to define the data for element numbers or element sets.

1. Node number or node set. Default data are not allowed.

2. Initial clearance.

Repeat this data line as often as necessary.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent uses of this data line.

2. E.

3. $\nu$.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent uses of this data line.

2. $D_{1111}$.

3. $D_{1122}$.

4. $D_{2222}$.

5. $D_{1133}$.

6. $D_{2233}$.

7. $D_{3333}$.

8. $D_{1212}$.

1. $D_{1313}$.

2. $D_{2323}$.

Repeat this set of data lines as often as necessary to define data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent uses of this data line.

2. $E_1$.

3. $E_2$.

4. $E_3$.

5. ${\nu }_{12}$.

6. ${\nu }_{13}$.

7. ${\nu }_{23}$.

8. $G_{12}$.

1. $G_{13}$.

2. $G_{23}$.

Repeat this set of data lines as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. $E_1$.

3. $E_2$.

4. ${\nu }_{12}$.

5. $G_{12}$.

6. $G_{13}$. This shear modulus is needed to define transverse shear behavior in shells.

7. $G_{23}$. This shear modulus is needed to define transverse shear behavior in shells.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent uses of this data line.

2. $D_{1111}$.

3. $D_{1122}$.

4. $D_{2222}$.

5. $D_{1133}$.

6. $D_{2233}$.

7. $D_{3333}$.

8. $D_{1112}$.

1. $D_{2212}$.

2. $D_{3312}$.

3. $D_{1212}$.

4. $D_{1113}$.

5. $D_{2213}$.

6. $D_{3313}$.

7. $D_{1213}$.

8. $D_{1313}$.

1. $D_{1123}$.

2. $D_{2223}$.

3. $D_{3323}$.

4. $D_{1223}$.

5. $D_{1323}$.

6. $D_{2323}$.

Repeat this set of data lines as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. Density.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. $\alpha$.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. ${\alpha }_{11}$.

3. ${\alpha }_{22}$.

4. ${\alpha }_{33}$. (Not used for plane stress case.)

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. ${\alpha }_{11}$.

3. ${\alpha }_{22}$.

4. ${\alpha }_{33}$. (Not used for plane stress case.)

5. ${\alpha }_{12}$.

6. ${\alpha }_{13}$.

7. ${\alpha }_{23}$.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. $v_f$.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. $AR$.

Repeat this data line as often as necessary to define the data for element numbers or element sets.

1. Blank space to define default data for the first use of this data line. Element number or element set for subsequent data lines.

2. $a_{11}$.

3. $a_{22}$.

4. $a_{33}$.

5. $a_{12}$.

6. $a_{13}$.

7. $a_{23}$.

Repeat this data line as often as necessary to define the data for element numbers or element sets.