ProductsAbaqus/Standard TypeModel data
LevelModel
At least one of the following parameters is required
- MASS
-
Set this parameter equal to the name of the mass matrix.
- STIFFNESS
-
Set this parameter equal to the name of the stiffness matrix.
- STRUCTURAL DAMPING
-
Set this parameter equal to the name of the structural damping matrix.
- VISCOUS DAMPING
-
Set this parameter equal to the name of the viscous damping matrix.
Optional parameters
- NSET
-
Use this parameter to remap nodes of the assembled matrices. Set this
parameter equal to the name of the node set that contains the new node labels
corresponding to all user-defined nodes of the matrices. The size of the node
set and the order of the nodes in the set must fully correspond to the combined
set of nodes of all the matrices that are specified in this option. If
necessary, use an unsorted node set to obtain the correct mapping. The matrix
nodes are assumed to be sorted in ascending order of their original labels that
were defined at generation or specified in the matrix data.
If this parameter is omitted, all user-defined nodes retain their original
labels.
There are no data lines associated with this option.
|