ProductsAbaqus/StandardAbaqus/CAE
TypeHistory data
LevelStep
Abaqus/CAEStep module
Optional, mutually exclusive parameters (if not specified, output will be provided for all cavities in the model)
- CAVITY
-
Set this parameter equal to the name of the cavity for which this output request is being made.
- ELSET
-
Set this parameter equal to the name of the element set for which this output request is being made.
- SURFACE
-
Set this parameter equal to the name of the surface for which this output request is being made.
Optional parameters
- VARIABLE
-
Set VARIABLE=ALL to indicate that all cavity radiation variables applicable to this procedure and material type should be written to the output database.
If this parameter is omitted, the cavity radiation variables requested for output must be specified on the data lines.
Data lines to request cavity radiation output
- First line
Specify the identifying keys for the variables to be written to the output database. The keys are defined in Abaqus/Standard output variable identifiers.
Repeat this data line as often as necessary to define the cavity radiation variables to be written to the output database.