*IMPORT NSET

Import node set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis.

This option is used to import node set definitions that were defined in a previous Abaqus/Explicit or Abaqus/Standard analysis. If the IMPORT NSET option is used, it must appear after the IMPORT option. If this option is omitted or is specified without any data lines, all the node sets relevant to the analysis will be imported.

If the IMPORT NSET option is used with the RENAME parameter in an Abaqus/Explicit import analysis, it must appear after an IMPORT option with active RENAME and NOFFSET parameters. The value of the NOFFSET parameter of the IMPORT option last input will be applicable to the IMPORT NSET option.

Related Topics
*IMPORT
In Other Guides
Transferring results between Abaqus/Explicit and Abaqus/Standard

ProductsAbaqus/StandardAbaqus/Explicit

TypeModel data

LevelModel

Required parameter if the imported node sets are to be renamed in an Abaqus/Explicit import analysis

RENAME

Include this parameter to specify new labels for the node sets to be imported from the previous analysis.

Data lines to specify the node set definitions to be imported but not renamed

First line

  1. List of node sets that are to be imported. Specify only node set names that are used in the previous Abaqus/Explicit or Abaqus/Standard analysis.

Repeat this data line as often as necessary to specify the node sets to be imported. Up to 16 node sets can be listed per line.

Data lines to specify the node set definitions to be imported and renamed (Abaqus/Explicit only)

First line

  1. The old name of the node set to be imported. Specify only old node set names that are used in the previous Abaqus/Explicit or Abaqus/Standard analysis.

  2. The new name of the node set in the import analysis.

Repeat this data line as often as necessary to specify the old and new names of the node sets to be imported.