ProductsAbaqus/StandardAbaqus/Explicit Using the translatorThe Nastran data must be in a file with the extension .bdf, .dat, .nas, .nastran, .blk, or .bulk. The Nastran data entries that are translated are listed in the tables below. Other valid Nastran data are skipped over and noted in the log file. The translator is designed to translate a complete Nastran input file. If only bulk data are present, the first two lines in the file should be the terminators for the executive control and case control sections, namely: CEND BEGIN BULK For normal termination, end the Nastran input data with the line ENDDATA Nastran solution sequences are translated to the Abaqus procedures listed in Table 1. The translator attempts to create a history section based on the contents of the case control data in the Nastran file. Summary of Nastran entities translated
Command summaryabaqus fromnastranjobjob-nameinputinput-filewtmass_fixup{OFFON}loadcases{OFFON}pbar_zero_resetsmall-real-numberdistribution{OFFpreservePIDON}surface_based_coupling{OFFON}beam_offset_coupling{OFFON}beam_orientation_vector{OFFON}cbar2-node-beam-elementcquad44-node-shell-elementchexa8-node-brick-elementctetra10-node-tetrahedron-elementplotel{OFFON}cdh_weld{OFFRIGIDCOMPLIANT}
Command line options
|