FieldOutput object

A FieldOutput object contains field data for a specific output variable.

The following topics are discussed:

FieldOutput
FieldOutput
addData
addData
addData
getScalarField
getScalarField
getSubset
getSubset
getSubset
getSubset
getSubset
getSubset
getSubset
getSubset
getSubset
getTransformedField
getTransformedField
getTransformedField
getConnectorFieldXformedToNodeA
setComponentLabels
setDataType
setValidInvariants
Members

import
odbAccess
session.odbs[name].steps[name].frames[i].fieldOutputs[name]

FieldOutput

This method creates a FieldOutput object.

session.odbs[name].steps[name].frames[i].FieldOutput

Required arguments

name: A String specifying the output variable name.
description: A String specifying the output variable. Colon (:) should not be used as a part of the field output description.
type: A SymbolicConstant specifying the output type. Possible values are SCALAR, VECTOR, TENSOR_3D_FULL, TENSOR_3D_PLANAR, TENSOR_3D_SURFACE, TENSOR_2D_PLANAR, and TENSOR_2D_SURFACE.

Optional arguments

componentLabels

A sequence of Strings specifying the labels for each component of the value. The length of the sequence must match the type. If type=TENSOR, the default value is name with the suffixes ('11', '22', '33', '12', '13', '23'). If type=VECTOR, the default value is name with the suffixes ('1', '2', '3'). If type=SCALAR, the default value is an empty sequence.

validInvariants

A sequence of SymbolicConstants specifying which invariants should be calculated for this field. An empty sequence indicates that no invariants are valid for this field. Possible values are:

MAGNITUDE
MISES
TRESCA
PRESS
INV3
MAX_PRINCIPAL
MID_PRINCIPAL
MIN_PRINCIPAL
MAX_INPLANE_PRINCIPAL
MIN_INPLANE_PRINCIPAL
OUTOFPLANE_PRINCIPAL

The default value is an empty sequence.

isEngineeringTensor

A Boolean specifying whether the field is an engineering tensor or not. Setting isEngineeringTensor to true makes a tensor field behave as a strain like quantity where the off-diagonal components of tensor are halved for invariants computation. This parameter applies only to tensor field outputs. The default value is OFF.

Return value

A FieldOutput object.

Exceptions

None

FieldOutput

This method creates a FieldOutput object from an existing FieldOutput object.

session.odbs[name].steps[name].frames[i].FieldOutput

Required arguments

field: A FieldOutput object.

Optional arguments

name: A String specifying the name of the FieldOutput object.
description: A String specifying the output variable. Colon (:) should not be used as a part of the field output description.

Return value

A FieldOutput object.

Exceptions

None

addData

This method adds data to a FieldOutput object.

Required arguments

position

A SymbolicConstant specifying the position of the output. Possible values are:

NODAL, specifying the values calculated at the nodes.
INTEGRATION_POINT, specifying the values calculated at the integration points.
ELEMENT_NODAL, specifying the values obtained by extrapolating results calculated at the integration points.
CENTROID, specifying the value at the centroid obtained by extrapolating results calculated at the integration points.

instance

An OdbInstance object specifying the namespace for labels.

labels

A sequence of Ints specifying the labels of the nodes or elements where the values in data are located. For better performance, the node or element labels are preferred to be sorted in ascending order and must be specified in the same order as the values provided for the data argument.

data

A sequence of sequences of Floats specifying the data values for the specified position, instance, and labels. The values must be given in the correct order. Element nodal data follow the order of nodal connectivity defined in the Abaqus documentation. Integration point data follow the order defined in the Abaqus documentation. Section point data for beams and shells follow the convention given in the Abaqus documentation. For more information, see Abaqus Elements Guide. These data create FieldValue objects internally.

Optional arguments

sectionPoint

A SectionPoint object specifying the location in the section. Although sectionPoint is an optional argument to the addData method, omitting the argument does have consequences for visualization. If you omit the argument when you are writing field output data for a shell or a beam, you cannot subsequently select the section point to display when you are displaying the field output data using the Visualization module.

localCoordSystem

The localCoordSystem parameter can be specified using either of the following:

A sequence of sequences of Floats specifying the 3 × 3 matrix of direction cosines of the local coordinate system. This argument is available only for fields with type=TENSOR or VECTOR.
A sequence of matrices of floats specifying the direction cosines of the local coordinates systems, where the sequence is the same length as data. If localCoordSystem is a matrix, a different local coordinate system applies to each data value.

User supplied values of localCoordSystem are transposed before storing in the database.

Return value

None

Exceptions

The addData method throws many exceptions of type odbException. For example, if the local coordinate system is specified for scalar data:: odbException: Transformation not allowed for scalar data.

addData

This method adds the data from a field created using the getSubset method and mathematical operators to the database. The user must create a field to contain the new data and then use the addData method to assign the data from the fields.

Required arguments

field: A FieldOutput object specifying the data to add.

Optional arguments

None

Return value

None

Exceptions

The addData method throws many exceptions of type odbException. For example, if the local coordinate system is specified for scalar data:: odbException: Transformation not allowed for scalar data.

addData

This method adds data to a FieldOutput object.

Required arguments

position

A SymbolicConstant specifying the position of the output. Possible values are:

NODAL, specifying the values calculated at the nodes.
INTEGRATION_POINT, specifying the values calculated at the integration points.
ELEMENT_NODAL, specifying the values obtained by extrapolating results calculated at the integration points.
CENTROID, specifying the value at the centroid obtained by extrapolating results calculated at the integration points.
ELEMENT_FACE_INTEGRATION_POINT, specifying the values calculated at the element face integration points.
SURFACE_INTEGRATION_POINT, specifying the values calculated at the surface integration points. Selecting this value prompts the Visualization module to calculate the sum of the values at the ELEMENT_FACE_INTEGRATION_POINT position from multiple surfaces.

set

An OdbSet object specifying the instance-level set defining the region for addData. The set must be defined in the same output database as the output database into which the new field output data is being written. For better performance, the node or element labels in the set are preferred to be sorted in ascending order and must be specified in the same order as the values provided for the data argument.

data

A sequence of sequences of Floats specifying the data values for the specified position and labels in the set. Each row of data provides the value at one unique position. The width of each row should match the number of required components for the data. The values must be given in the order that matches the ordering of labels in the set.

The order of the element nodal data, integration point data, and section point data for beams and shells follows the conventions defined in Abaqus Elements Guide.

Optional arguments

sectionPoint: A SectionPoint object specifying the location in the section. AlthoughsectionPoint is an optional argument to theaddData method, omitting the argument does have consequences for visualization. If you omit the argument when you are writing field output data for a shell or a beam, you cannot subsequently select the section point to display when you are displaying the field output data using the Visualization module.
conjugateData: An odb_SequenceSequenceFloat object specifying the imaginary data values for the specified position, instance, and labels. You must provide this data when you add complex fields to the output database. The order of the values follows the conventions defined in Abaqus Elements Guide.

Return value

None

Exceptions

If you specify an odbSet containing entities from multiple instances:: odbException: Entities from multiple instances present in set.
The addData method throws many exceptions of type odbException. For example, if the local coordinate system is specified for scalar data:: odbException: Transformation not allowed for scalar data.

getScalarField

This method generates a scalar field containing the extracted component or calculated invariant values. The new field will hold values for the same nodes or elements as the parent field. Abaqus will perform this operation on only the real part of the FieldOutput object. The operation is not performed on the conjugate data (the imaginary portion of a complex result).

Required arguments

invariant: A SymbolicConstant specifying the invariant. Possible values areMAGNITUDE, MISES, TRESCA, PRESS, INV3, MAX_PRINCIPAL, MID_PRINCIPAL, MIN_PRINCIPAL, MAX_INPLANE_PRINCIPAL, MIN_INPLANE_PRINCIPAL, and OUTOFPLANE_PRINCIPAL.

Optional arguments

None

Return value

AFieldOutput object.

Exceptions

None

getScalarField

Required arguments

componentLabel: A String specifying the component label, such as “S11”.

A SymbolicConstant specifying the position of the output in the element. Possible values are:

NODAL, specifying the values calculated at the nodes.
INTEGRATION_POINT, specifying the values calculated at the integration points.
ELEMENT_NODAL, specifying the values obtained by extrapolating results calculated at the integration points.
CENTROID, specifying the value at the centroid obtained by extrapolating results calculated at the integration points.

If the requested field values are not found in the output database at the specified ELEMENT_NODAL or CENTROID positions, they are extrapolated from the field data at the INTEGRATION_POINT position.

readOnly

elementType: A String specifying the element type for which to extract values. The string must correspond to a valid Abaqus element type.

Return value

A FieldOutput object.

Exceptions

None

getTransformedField

This method generates a new vector or tensor field containing the transformed component values of the parent field. The new field will hold values for the same nodes or elements as the parent field. Results will be transformed based on the orientations specified by the input DatumCsys object. Abaqus will perform this operation on only the real part of the FieldOutput object. The operation is not performed on the conjugate data (the imaginary portion of a complex result).

Required arguments

datumCsys: A valid DatumCsys object designating the coordinate system. Valid systems can be fixed or positioned with respect to nodes on the model and can be cartesian, cylindrical, or spherical.

Optional arguments

projected22Axis: An Int specifying which axis of the coordinate system will be projected as the second component for local result orientations. Valid values are 1, 2, or 3; the default value is 2.
projectionTol: A Double specifying the minimum allowable angle (radians) between the specified projection axis and the element normal. The next axis will be used for projection if this tolerance test fails.

Return value

A FieldOutput object.

Exceptions

The getTransformedField method throws an exception if the field contains any assembly level nodes.: odbException: Cannot apply transformation to field containing assembly level nodes.

getTransformedField

Required arguments

datumCsys: A valid DatumCsys object designating the coordinate system. Valid systems can be fixed or positioned with respect to nodes on the model and can be cartesian, cylindrical, or spherical.

Optional arguments

deformationField: A FieldOutput object specifying the nodal displacement vectors required by moving coordinate systems to determine instantaneous configurations.
projected22Axis: An Int specifying which axis of the coordinate system will be projected as the second component for local result orientations. Valid values are 1, 2, or 3; the default value is 2.
projectionTol: A Double specifying the minimum allowable angle (radians) between the specified projection axis and the element normal. The next axis will be used for projection if this tolerance test fails.

Return value

A FieldOutput object.

Exceptions

The getTransformedField method throws an exception if the field contains any assembly level nodes.: odbException: Cannot apply transformation to field containing assembly level nodes.

getTransformedField

Required arguments

datumCsys: A valid DatumCsys object designating the coordinate system. Valid systems can be fixed or positioned with respect to nodes on the model and can be cartesian, cylindrical, or spherical.

Optional arguments

deformationField: A FieldOutput object specifying the nodal displacement vectors required by moving coordinate systems to determine instantaneous configurations.
rotationField: A FieldOutput object specifying the nodal rotational displacement vectors required by moving coordinate systems that follow a 6-dof node, to determine instantaneous configurations.
projected22Axis: An Int specifying which axis of the coordinate system will be projected as the second component for local result orientations. Valid values are 1, 2, or 3; the default value is 2.
projectionTol: A Double specifying the minimum allowable angle (radians) between the specified projection axis and the element normal. The next axis will be used for projection if this tolerance test fails.

Return value

A FieldOutput object.

Exceptions

The getTransformedField method throws an exception if the field contains any assembly level nodes.: odbException: Cannot apply transformation to field containing assembly level nodes.

getConnectorFieldXformedToNodeA

This method generates a new vector field containing the transformed component values of the parent connector field to the node A coordinate system. The new field will hold values for the same connector elements as the parent field. Some connection types such as Axial, Link, Slip Ring, and Radial Thrust require that the deformationField be specified.

Required arguments

None

Optional arguments

deformationField: A FieldOutput object specifying the nodal displacement vectors required by moving coordinate systems to determine instantaneous configurations.

Return value

A FieldOutput object.

Exceptions

The getConnectorFieldXformedToNodeA method throws an exception if the field requires a deformationField and the argument is not supplied.: odbException: Deformation field is required for transforming this connector field.

setComponentLabels

This method sets the component labels for the FieldOutput object.

Required arguments

componentLabels: A sequence of Strings specifying the labels for each component of the value. The length of the sequence must match the type. If type=TENSOR, the default value is name with the suffixes ('11', '22', '33', '12', '13', '23'). If type=VECTOR, the default value is name with the suffixes ('1', '2', '3'). If type=SCALAR, the default value is an empty sequence.

Return value

None

Exceptions

None

setDataType

This method sets the data type of a FieldOutput object.

Required arguments

type: A SymbolicConstant specifying the output type. Possible values are SCALAR, VECTOR, TENSOR_3D_FULL, TENSOR_3D_PLANAR, TENSOR_3D_SURFACE, TENSOR_2D_PLANAR, and TENSOR_2D_SURFACE.

Return value

None

Exceptions

None

setValidInvariants

This method sets the invariants valid for the FieldOutput object.

Required arguments

validInvariants

A sequence of SymbolicConstants specifying which invariants should be calculated for this field. An empty sequence indicates that no invariants are valid for this field. Possible values are:

MAGNITUDE
MISES
TRESCA
PRESS
INV3
MAX_PRINCIPAL
MID_PRINCIPAL
MIN_PRINCIPAL
MAX_INPLANE_PRINCIPAL
MIN_INPLANE_PRINCIPAL
OUTOFPLANE_PRINCIPAL

The default value is an empty sequence.

Return value

None

Exceptions

None

Members

The FieldOutput object has members with the same names and descriptions as the arguments to the FieldOutput method.

In addition, the FieldOutput object can have the following members:

dim: An Int specifying the dimension of vector or the first dimension (number of rows) of matrix.
dim2: An Int specifying the second dimension (number of columns) of matrix.
isComplex: A Boolean specifying whether the data are complex.
locations: A FieldLocationArray object.
values: A FieldValueArray object specifying the order of the objects in the array is determined by the Abaqus Scripting Interface; see the data argument to the addData method for a description of the order.