Creating homogeneous solid sections

Homogeneous solid sections are used to define the section properties of two-dimensional, three-dimensional, and axisymmetric solid regions. For more information, see Solid (continuum) elements.

  1. From the main menu bar, select SectionCreate.

    A Create Section dialog box appears.

    Tip: You can also click Create in the Section Manager or select the create section tool in the Property module toolbox.

  2. Enter a section name. For more information on naming objects, see Using basic dialog box components.

  3. Select Solid as the section Category and Homogeneous as the section Type, and click Continue.

    The solid section editor appears.

  4. Select a material for the solid section. If desired, click to create a material; see Creating or editing a material, for more information.

  5. Enter a value for the section Plane stress/strain thickness. If the section will be used with a two-dimensional region, you must specify the section thickness. Abaqus/CAE ignores the thickness information if it is not needed for the region type.

  6. Click OK to save your changes and to close the solid section editor.