Specifying uniaxial test data for a hyperelastic foam material model

Use the Test Data Editor to specify uniaxial test data from which Abaqus can calibrate hyperelastic foam material coefficients. For more information, see Hyperelastic behavior in elastomeric foams.

  1. Create a hyperelastic foam material model as described in Providing test data to define a hyperelastic foam material model.”

  2. From the Suboptions menu in the Edit Material dialog box, select Uniaxial Test Data.

    A Test Data Editor appears.

  3. In the Data table, enter the uniaxial test data:

    Nominal Stress

    Nominal stress, TU.

    Nominal Strain

    Nominal strain, ϵU.

    Lateral Nominal Strain

    Nominal lateral strain, ϵ2=ϵ3. This parameter is unnecessary if you have already entered a constant Poisson's ratio in the Edit Material dialog box.

    You may need to expand the dialog box to see all the columns in the Data table. For detailed information on how to enter data, see Entering tabular data.

  4. Click OK to return to the Edit Material dialog box.