*HEADING
TEMPERATURE DEPENDENT FILM CONDITION [S4RT]
**
** The elements are assigned to a non-isothermal rigid body 
** See ch. 1.11.6 and 1.3.37 of ABAQUS/Verification Manual
**
** Only one very thick thermal shell is used; the thickness represents
** the length of the model; The film Condidition is applied on
** SNEG; NT11 will be the highest temp (heat difussion takes places through 
*** the thickness) and NT2 the coolest;
**  
*PREPRINT, MODEL=YES, HISTORY=YES
*RESTART,WRITE, NUM=10
*NODE
1, 0.0,  0.0
11,0.0,  0.1
12,0.01, 0.0
22,0.01, 0.1
*NGEN,NSET=NALL
1,11
12,22
*ELEMENT,TYPE=S4RT, ELSET=EALL
1,1,12,13,2
*SHELL SECTION,ELSET=EALL,MATERIAL=MAT
0.1,19
*MATERIAL,NAME=MAT
*ELASTIC
1.0,0.0
*EXPANSION
0.0,
*CONDUCTIVITY
1.40, 
*SPECIFIC HEAT
260.0, 
*DENSITY
7800.0, 
*FILM PROPERTY,NAME=FILMP
10.0,  0.0
16.0,300.0
*AMPLITUDE,NAME=SINK
0.0,100.0, 3600.0,200.0
*INITIAL CONDITIONS,TYPE=TEMPERATURE
NALL,0.0
*STEP
*DYNAMIC TEMPERATURE-DISPLACEMENT, EXPLICIT
,3600.
*FILM,AMP=SINK
1,FNEG,1.0,FILMP
****************************
*OUTPUT,FIELD,NUM=1
*NODE OUTPUT,NSET=NALL
NT, 
****************************
*OUTPUT,HISTORY,TIME INTERVAL=360
*NODE OUTPUT,NSET=NALL
NT, 
****
*OUTPUT,HISTORY,TIME INTERVAL=360
*ENERGY OUTPUT,VAR=ALL
****************************
*END STEP