***************************************************************
**
** translated data from the Moldflow interface files named
** "moldflow_ex2.pat"
**  and
** "moldflow_ex2.osp"
**
** to the following Abaqus input files:
**
**            input file = moldflow_ex2.inp:  YES
**
** neutral material file = moldflow_ex2.shf:  NO
**                         (for *ELASTIC/*EXPANSION data)
**
**   initial stress file = moldflow_ex2.str:  YES
**                         (for *INITIAL CONDITIONS data)
**-------------------------------------------------------------
** echo of header information from the Moldflow interface 
** files:
**
** TITL information from .osp file:
** TITL
**
** FILE information from .osp file:
** FILE  JUN14-2002  11:19:59 mpi310 Residual Stress & 
** Properties
**
**      number of nodal properties = 0
**    number of element properties = 45
**                 number of nodes = 958
**          number of TRI elements = 1719
**           number of 1D elements = 32
**
** Moldflow results were written with IST coding, i.e.,
** this is an unfilled anisotropic material with residual 
** stresses
**            -------- -----------          ----
**-------------------------------------------------------------
** this input file was created with the following keyword data:
**
**      *NODE     (926 nodes)
**
**      *ELEMENT  (1719 S3R elements)
**
**      *SHELL SECTION, COMPOSITE  (7 ELSETs)
**
**      *MATERIAL
**      *ELASTIC, TYPE=SHORT FIBER
**      *EXPANSION, TYPE=SHORT FIBER
**       (elastic and expansion data will be read from file
**        moldflow_ex2.shf)
**
**      *INITIAL CONDITIONS, TYPE=STRESS, SECTION POINTS,
**       INPUT=moldflow_ex2.str
**
**      *STEP
**       (Dummy step data.  Loads and boundary conditions
**        may need to be added to complete the model.)
***************************************************************
*HEADING
TITL
***************************************************************
*NODE, NSET=NALL, INPUT=moldflow_ex2_nodes.inp
***************************************************************
*ELEMENT, TYPE=S3R, ELSET=EALL, INPUT=moldflow_ex2_elements.inp
***************************************************************
*INCLUDE, INPUT=moldflow_ex2_elsets.inp
***************************************************************
*INCLUDE, INPUT=moldflow_ex2_sections.inp
***************************************************************
*MATERIAL,NAME=moldflow_mat_01
*ELASTIC,TYPE=SHORT FIBER
*EXPANSION,TYPE=SHORT FIBER
*DENSITY
1500.,
***************************************************************
*INITIAL CONDITIONS,TYPE=STRESS,SECTION POINTS,
 INPUT=moldflow_ex2.str
***************************************************************
*STEP
*FREQUENCY, EIGENSOLVER=LANCZOS
10, 
*END STEP