Nodal variables

POR

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Acoustic pressure.

INFR

.dat: no  .fil: no  .odb Field: yes  .odb History: no  

Acoustic infinite element “radius,” used in the coordinate map for these elements. Available only if the direct-solution steady-state dynamic procedure is used, and available only for nodes attached to acoustic infinite elements.

INFC

.dat: no  .fil: no  .odb Field: yes  .odb History: no  

Acoustic infinite element “cosine,” used in the coordinate map for these elements. Available only if the direct-solution steady-state dynamic procedure is used, and available only for nodes attached to acoustic infinite elements.

INFN

.dat: no  .fil: no  .odb Field: yes  .odb History: no  

Acoustic infinite element normal vector. Available only if the direct-solution steady-state dynamic procedure is used, and available only for nodes attached to acoustic infinite elements.

PINF

.dat: no  .fil: no  .odb Field: yes  .odb History: no  

Acoustic pressure coefficients for the higher-order basis functions in acoustic infinite elements. Available only if the direct-solution steady-state dynamic procedure is used, and available only for acoustic infinite elements.

SPL

.dat: no  .fil: no  .odb Field: yes  .odb History: yes  

Acoustic sound pressure level at a node.

PHILSM

.dat: no  .fil: no  .odb Field: yes  .odb History: yes  

Signed distance function to describe the crack surface.

PSILSM

.dat: no  .fil: no  .odb Field: yes  .odb History: yes  

Signed distance function to describe the initial crack front.

The following variables correspond to heat flux in temperature analyses or concentration volumetric flux in mass diffusion analysis:

RFL

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

All reaction flux values (conjugate to prescribed temperature or normalized concentration).

RFLn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Reaction flux value n at a node ($n=11,12,\mathrm{\dots }$) (conjugate to prescribed temperature or normalized concentration).

CFL

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

All concentrated flux values, including those imported using the CFL co-simulation field ID.

CFLn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Concentrated flux values n at a node ($n=11,12,\mathrm{\dots }$).

RFLE

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

The total flux at the node (including flux convected through the node in convection elements), excluding external fluxes (due to concentrated fluxes, distributed fluxes, film conditions, radiation conditions, and radiation view factors). The value of RFLE is, thus, equal and opposite to the sum of all applied fluxes.

RFLEn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Flux value n excluding externally applied flux loads at a node ($n=11,12,\mathrm{\dots }$).

The following variables are available only for steady-state (frequency domain) dynamic analyses (modal and direct). These variables include both magnitude and phase angle for all components. Phase angles are given in degrees. In the data file there are two lines of output for each request. The first line contains the magnitude, and the second line (indicated by the SSD footnote) contains the phase angle. In the results file, the magnitudes of all components are first, followed by the phase angles of all components.

PU

.dat: yes  .fil: yes  .odb Field: no  .odb History: no  

Magnitude and phase angle of all displacement components at the node and magnitude and phase angle of the rotations at nodes with rotational degrees of freedom.

PUn

.dat: yes  .fil: no  .odb Field: no  .odb History: no  

Magnitude and phase angle of component n of the displacement ($n=1,2,3$).

PURn

.dat: yes  .fil: no  .odb Field: no  .odb History: no  

Magnitude and phase angle of component n of the rotation ($n=1,2,3$).

PPOR

.dat: yes  .fil: yes  .odb Field: no  .odb History: no  

Magnitude and phase angle of the fluid, pore, or acoustic pressure at the node.

PHPOT

.dat: yes  .fil: yes  .odb Field: no  .odb History: no  

Magnitude and phase angle of the electrical potential at the node.

PRF

.dat: yes  .fil: yes  .odb Field: no  .odb History: no  

Magnitude and phase angle of the reaction forces at the node and of the reaction moments at nodes with rotational degrees of freedom.

PRFn

.dat: yes  .fil: no  .odb Field: no  .odb History: no  

Magnitude and phase angle of component n of the reaction force ($n=1,2,3$).

PRMn

.dat: yes  .fil: no  .odb Field: no  .odb History: no  

Magnitude and phase angle of component n of the reaction moment ($n=1,2,3$).

PHCHG

.dat: yes  .fil: yes  .odb Field: no  .odb History: no  

Magnitude and phase angle of the reactive charge at the node.

The following variables are available only for modal dynamic, steady-state (frequency domain), and random response analyses. “Relative” values are measured relative to the motion of the primary base and are obtained with the identifiers U, V, and A; “Total” values include the motion of the primary base. For steady-state dynamic output printed to the data file, there are two lines printed for each request; the first line contains the real part of the variable, and the second line (indicated by the SSD footnote) contains the imaginary part.

TU

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

All components of the total displacements at the node and of the total rotations at nodes with rotational degrees of freedom.

TUn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Component n of the total displacement ($n=1,2,3$).

TURn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Component n of the total rotation ($n=1,2,3$).

TV

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

All components of the total velocity at the node, including rotational velocities at nodes with rotational degrees of freedom.

TVn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Component n of the total velocity ($n=1,2,3$).

TVRn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Component n of the total rate of rotation ($n=1,2,3$).

TA

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

All components of the total acceleration at the node, including rotational accelerations at nodes with rotational degrees of freedom.

TAn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Component n of the total acceleration ($n=1,2,3$).

TARn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Component n of the total rotational acceleration ($n=1,2,3$).

The following variables are available only for steady-state (frequency domain) dynamic analysis based on modal superposition. “Total” values include the base motion.

PTU

.dat: yes  .fil: yes  .odb Field: no  .odb History: no  

Magnitude and phase angle of the total displacement components at the node and magnitude and phase angle of the total rotations at nodes with rotational degrees of freedom.

PTUn

.dat: yes  .fil: no  .odb Field: no  .odb History: no  

Magnitude and phase angle of component n of the total displacement ($n=1,2,3$).

PTURn

.dat: yes  .fil: no  .odb Field: no  .odb History: no  

Magnitude and phase angle of component n of the total rotation ($n=1,2,3$).

The following variables correspond to fluid volume flux in pore pressure analyses.

RVF

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Reaction fluid volume flux due to prescribed pressure. This flux is the rate at which fluid volume is entering or leaving the model through the node to maintain the prescribed pressure boundary condition. A positive value of RVF indicates fluid is entering the model.

RVT

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Reaction total fluid volume (computed only in a transient coupled pore fluid diffusion/stress analysis). This value is the time integrated value of RVF.

The following variables are available only for random response dynamic analysis. “Relative” values are measured relative to the base motion; “Total” values include the base motion.

RU

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the relative displacement at the node and of the components of rotation at nodes with rotational degrees of freedom.

RUn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the relative displacement ($n=1,2,3$).

RURn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the relative rotation ($n=1,2,3$).

RTU

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the total displacement at the node and of the components of total rotation at nodes with rotational degrees of freedom.

RTUn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the total displacement ($n=1,2,3$).

RTURn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the total rotation ($n=1,2,3$).

RV

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the relative velocity at the node and of the components of the rate of rotation at nodes with rotational degrees of freedom.

RVn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the relative velocity ($n=1,2,3$).

RVRn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the relative rate of rotation ($n=1,2,3$).

RTV

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the total velocity at the node and of the components of total rotation at nodes with rotational degrees of freedom.

RTVn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the total velocity ($n=1,2,3$).

RTVRn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the total rate of rotation ($n=1,2,3$).

RA

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the relative acceleration at the node and of the components of rotational acceleration at nodes with rotational degrees of freedom.

RAn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the relative acceleration ($n=1,2,3$).

RARn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the relative rotational acceleration ($n=1,2,3$).

RTA

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the total acceleration at the node and of the components of rotational acceleration at nodes with rotational degrees of freedom.

RTAn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the total value of acceleration ($n=1,2,3$).

RTARn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the total rotational acceleration ($n=1,2,3$).

RRF

.dat: yes  .fil: yes  .odb Field: yes  .odb History: yes  

Root mean square values of all components of the reaction forces and of reaction moments at nodes with rotational degrees of freedom.

RRFn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the reaction force ($n=1,2,3$).

RRMn

.dat: yes  .fil: no  .odb Field: no  .odb History: yes  

Root mean square value of component n of the reaction moment ($n=1,2,3$).