Element section variables

The output variables listed below are available in Abaqus/Explicit.

STH: .fil: yes .odb Field: yes .odb History: yes
Section thickness (shell, membrane, and plane stress elements only).
STHIN: .fil: no .odb Field: yes .odb History: yes
Section thinning or thickening is defined as $S T H I N = 1 - \frac{S T H}{S T H_{o r i g}}$ , where $S T H_{o r i g}$ is the original thickness specified on the section definition for shell, membrane, and plane stress elements.
SFAILRATIO: .fil: no .odb Field: yes .odb History: no
Section failure ratio across all the shell's layers defined as $S F a i l R a t i o = \frac{n u m F a i l e d L a y e r s}{n u m T o t a l L a y e r s}$ , where $n u m F a i l e d L a y e r s$ is the number of failed layers (a shell layer is considered failed when all of the section points in the layer failed), and $n u m T o t a l L a y e r s$ is the total number of layers in the shell.
SF: .fil: yes .odb Field: yes .odb History: yes
All section resultant components, both translational (forces) and rotational (moments).
SFn: .fil: no .odb Field: no .odb History: yes
Section force per unit width of component n, $n = 1, 2, 3, 4, 5$ for conventional shells; $n = 1, 2, 3, 4, 5, 6$ for continuum shells; $n = 1, 2, 3$ for beams and pipes.
SMn: .fil: no .odb Field: no .odb History: yes
Section moment per unit width of component n, $n = 1, 2, 3$ .
SORIENT: .fil: no .odb Field: yes .odb History: no
Composite shell section orientations.
SE: .fil: yes .odb Field: yes .odb History: yes
All section nominal strains, both translational and rotational (e.g., midplane strain and curvature in shells).
SEn: .fil: no .odb Field: no .odb History: yes
Section nominal strain component n, $n = 1, 2, 3, 4, 5, 6$ for shells; $n = 1, 2, 3$ for beams and pipes.
SKn: .fil: no .odb Field: no .odb History: yes
Section curvature change or twist n, $n = 1, 2, 3$ .
SSAVG: .fil: yes .odb Field: yes .odb History: no
All average membrane and transverse shear stress components (shell elements only).
SSAVGn: .fil: no .odb Field: no .odb History: yes
Average membrane or transverse shear stress component n, $n = 1, 2, 3, 4, 5, 6$ (shell elements only).