From the Composite Layup editor, click the
Display tab.
Choose how
Abaqus/CAE
highlights the plies that you selected in the ply table:
-
Choose On to highlight the selected plies.
-
Choose Off to stop highlighting the selected
plies. If you have a large number of plies in your model, you may want to turn
off highlighting to increase performance.
Choose which orientation
Abaqus/CAE
displays on the selected plies:
-
Choose Ply to display the ply orientation on
the selected plies.
-
Choose Layup to display the layup orientation
on the selected plies.
-
Choose None to stop displaying an
orientation.
Specify which orientation vectors you want to display on the selected
plies. You can toggle the display of vectors in the 1-direction, the
2-direction, and the 3- (or normal) direction, as well as the reference
direction that shows the 1-direction before rotation of the ply's material
directions.
|