This section describes how you can tune feature regeneration using
settings in the Feature Options dialog box.
You open the Feature Options dialog box by
selecting
FeatureOptions
from the main menu bar. In most cases the default settings will result in
acceptable regeneration performance. You should modify the feature options only
if
Abaqus/CAE
takes a long time to regenerate a part or the assembly or if memory consumption
is excessive.
The settings in the Feature Options dialog box apply
only to the current model and are saved in the model database. If you change to
a different model,
Abaqus/CAE
reverts to the default settings or to any modified settings associated with the
new model.